Brother DSmobile DS-940DW Handleiding voor snelle installatie - Pagina 5
Blader online of download pdf Handleiding voor snelle installatie voor {categorie_naam} Brother DSmobile DS-940DW. Brother DSmobile DS-940DW 10 pagina's.
Ook voor Brother DSmobile DS-940DW: Handleiding voor snelle installatie (11 pagina's)
Pagina afdrukken
Product Safety Guide
(DSmobile DS-940DW only)
DO NOT disassemble or modify the rechargeable
Li-ion battery.
(DSmobile DS-940DW only)
DO NOT dispose of the rechargeable Li-ion
battery in fire or intentionally overheat. This could
cause the internal insulation to melt, gas to be
emitted, or safety mechanisms to fail. Additionally,
the electrolyte solution could catch fire.
(DSmobile DS-940DW only)
DO NOT puncture the rechargeable Li-ion
battery with any objects, subject it to severe
shocks or throw it. Damage to the rechargeable
Li-ion battery's protection circuit could cause the
rechargeable Li-ion battery to be recharged at an
abnormal current/voltage or cause an abnormal
chemical reaction within the rechargeable Li-ion
battery.
(DSmobile DS-940DW only)
DO NOT incinerate the rechargeable Li-ion battery
or dispose of it with household waste.
WARNING
(DSmobile DS-940DW only)
Keep the rechargeable Li-ion battery away from
infants. If ingested, contact emergency services
immediately.
Store the USB cable bundled and out of the reach
of children to avoid the risk of injury.
DO NOT disassemble or modify the scanner,
otherwise a fire or electric shock may occur. If
the scanner requires repair, contact your Brother
dealer or Brother customer service.
(DSmobile DS-940DW only)
Stop using the rechargeable Li-ion battery if there
are noticeable abnormalities such as smell, heat,
deformities, or discoloration. Turn the power
switch off immediately and remove the USB cable
from the power source.
In the event that foreign material enters the
scanner, turn the power switch off immediately and
remove the USB cable. Contact the store where
this scanner was purchased. This may result in a
fire, electric shock, or device failure.
DO NOT place the scanner near radiators,
heaters, air conditioners, water, chemicals
or devices that contain magnets or generate
magnetic fields. Doing so may create the risk
of a short circuit or fire should water come into
contact with the scanner (including condensation
from heating, air conditioning, and/or ventilation
equipment that may be sufficient to create a short
circuit or fire).
DO NOT place the scanner near chemicals or in
a place where chemical spillage could occur. In
particular, organic solvents or liquids may cause
the casing and/or cables to melt or dissolve,
risking a fire or electrical shock. They may also
cause the scanner to malfunction or become
discolored.
Plastic bags are used in the packaging of the
scanner. To avoid danger of suffocation, keep
these plastic bags away from babies and children.
Plastic bags are not toys.
DO NOT expose the scanner to direct sunlight,
excessive heat, open flames, corrosive gasses,
moisture or dust. DO NOT place the scanner on a
carpet or rug, as this will expose it to dust. Doing
so may create a risk of an electrical short or fire.
It may also damage the scanner and/or render it
inoperable.
5