Fujitsu Stylistic Q552 Bios Handleiding - Pagina 18
Blader online of download pdf Bios Handleiding voor {categorie_naam} Fujitsu Stylistic Q552. Fujitsu Stylistic Q552 25 pagina's. Slate pc
Ook voor Fujitsu Stylistic Q552: Aan de slag handleiding (15 pagina's), Gegevensblad (2 pagina's)
Pagina afdrukken
S T Y L I S T I C Q 5 5 2 B I O S
Table 12: Fields, Options and Defaults for the Security Menu
Menu Field
Options
Supervisor
–—
Password is:
User Password is:
–—
Set Supervisor
–—
Password
Set User Password
–—
Minimum User
–—
Password Length:
Password on Boot:
Disabled
First Boot
Every Boot
Boot from
All
Removable Media:
Supervisor only
Flash Write:
Disabled
Enabled
Boot Menu:
Disabled
Enabled
Hard Disk Security: –—
Owner
–—
Information:
TPM (Security
___
Chip) Setting
Exiting from the Security Menu
When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or
move to another menu. If you wish to exit from setup utility, press the [Esc] key to go to the Exit Menu. If you wish
to move to another menu, use the cursor keys.
18
Default
Description
Clear
A display-only field. Set is displayed when the system supervisor pass-
word is set and Clear when it is not.
Clear
A display-only field. Set is displayed when the general user
password is set, and Clear when it is not.
[Enter]
Sets, changes or cancels the Supervisor Password. A Supervisor Pass-
word may be up to seven characters long and must include only letters
or numbers (no symbols). Passwords are NOT case-sensitive. To cancel
a password press the Enter key instead of entering characters in the
Enter New Password field and in the Re-enter New Password field.
When a Supervisor Password is set it must be used to access BIOS setup
utility.
[Enter]
This field can only be accessed if the Supervisor Password is set. Sets,
changes or cancels the User Password. A User Password may be up to
seven characters long and must include only letters or numbers (no
symbols). Passwords are NOT case-sensitive. To cancel a password press
[Enter] key instead of entering characters in the Enter New Password
field and in the Re-enter New Password field. When a User Password is
set it must be used to access the BIOS setup utility.
[0]
Supervisor can set password length (0 to 32) for user password. User
cannot set a password shorter than the minimum length.
[Disabled]
When set to First Boot, a password (User or Supervisor) is required just
once after the Power On Self Test (POST) before the operating system
will be read from a disk. When set to Every Boot, a password (User or
Supervisor) is required every time after the Power On Self Test (POST)
before the operating system will be read from a disk. When set to Dis-
abled no password is required.
[All]
Supervisor only allows access to boot the computer to removable media
after the Supervisor Password is entered.
[Enabled]
When disabled, the BIOS Flash memory will be write protected.
[Enabled]
When disabled, the Boot Menu is disabled and cannot be opened using
the [F12] key.
–—
Configures hard disk security features
–—
Sets Owner information.
___
Sets the TPM (Security Chip) settings