Fujitsu T4215 - LifeBook Tablet PC Gebruiksaanwijzing Addendum - Pagina 2
Blader online of download pdf Gebruiksaanwijzing Addendum voor {categorie_naam} Fujitsu T4215 - LifeBook Tablet PC. Fujitsu T4215 - LifeBook Tablet PC 2 pagina's. Lifebook t series
Ook voor Fujitsu T4215 - LifeBook Tablet PC: Gebruikershandleiding (13 pagina's), Bios Handleiding (33 pagina's)
Pagina afdrukken
L i f e B o o k T S e r i e s T a b l e t P C
3. Installing Click Me!
Please use the information below in place of "Installing
ClickMe!" on page 40 of the User's Guide.
Before installing the ClickMe! utility, be
sure the wireless LAN switch is turned on.
The first time you boot up your system, you will see a
"Primary Settings for the PC" window. This window explains
the installations which will be performed by the Click Me!
utility. If you click [Execute], Click Me! will begin installing. If
after clicking the button you receive a "User Account Control"
window, you will be asked for your permission to continue.
Click [Yes] to continue. If you cancel the operation, the Click
Me! icon will appear on your desktop for later installation.
4. Hibernation (Save-to-Disk) Feature
Please use the information below in place of "Hibernate
Mode" on page 37 of the User's Guide.
The Hibernation feature saves the contents of your
notebook's system memory to the hard drive as a part of
the Suspend/Resume mode. You can enable or disable this
feature.
Enable or Disable the Hibernation Feature
The default settings are not enabled. To enable or disable
the Hibernation feature follow these steps:
1. From the Start menu, select Control Panel.
2. Select "Choose what the power button does" or
"Choose what closing the lid does", then make your
selections (Do Nothing, Sleep, Hibernate, or Shut
Down).
5. Restarting the System
Please use the information below in place of "Restarting the
System" on page 37 of the User's Guide.
If your system is on and you need to restart it, be sure that
you use the following procedure.
1. Click the Start button, and then move the mouse over
the right arrow.
2. Select the desired action from the list.
Turning off your LifeBook notebook with-
out exiting Windows or turning on your
notebook within 10 seconds of the note-
book being shut off may cause an error
when you start the next time.
2
6. Switching from Google Sidebar to Vista
Sidebar
1. Disable Google Sidebar by right-clicking the Google
Deskbar icon in the Windows taskbar at the bottom
right of the screen. Instead of Sidebar, choose one of
the other options: Deskbar, Floating Deskbar, or
None. (Note that selecting None will also disable
Google Deskbar.)
2. Enable the Vista Sidebar by going to Start -> All
Programs -> Accessories, then select Windows
Sidebar.
7. Wireless LAN Changes
Please use the Vista-specific information below in place of
the related section on page 97 of the User's Guide.
Configuring the WLAN with Windows Vista
The WLAN device can be configured to establish wireless
network connectivity using the software that is built into
Windows Vista. Support for most industry standard secu-
rity solutions is contained in this software.
Pre-defined parameters will be required for this procedure.
Please consult with your network administrator for these
parameters:
1. Click the Start button, then select Control Panel.
2. If the Control Panel is not in Classic View, select Clas-
sic View from the left panel. Double-click the Network
and Sharing Center icon.
3. Select "Manage wireless networks" from the left panel.
4. Click on the [Add] button.
5. Depending upon what type of connection you would
like to make, make a selection. For an infrastructure
network, select "Manually create a network profile. For
ad hoc network, select "Create an ad hoc network".
6. Enter the required information. It may be necessary to
consult with your network administrator for some of
the information.
7. In the event you require assistance, go to the Network
and Sharing Center window (Start -> Control Panel ->
Network and Sharing Center), and type in relevant
keywords in the Search box.
Connecting to a Network with Windows Vista
After you have configured your computer, you can connect
to an active network by performing the following steps:
1.
Click on the WLAN icon in the system tray.
2.
Select "connect to a network".
Select a network from the list that appears, and click the
[Connect] button.