Fujitsu T4410 - LifeBook Tablet PC Bios Handleiding - Pagina 18
Blader online of download pdf Bios Handleiding voor {categorie_naam} Fujitsu T4410 - LifeBook Tablet PC. Fujitsu T4410 - LifeBook Tablet PC 27 pagina's. Lifebook t series
Ook voor Fujitsu T4410 - LifeBook Tablet PC: Diagnostisch handboek (10 pagina's), Herstel handleiding (8 pagina's), Aan de slag (13 pagina's), Gebruikershandleiding (8 pagina's)
L i f e B o o k T S e r i e s B I O S
SECURITY MENU – SETTING THE SECURITY FEATURES
The Security menu allows you to set up the data security features of your notebook to fit your operating needs and to
view the current data security configuration. (See Navigating through the Setup Utility on page 2 for more information.)
The following tables show the names of the menu fields for the Security Menu and its submenus, all the options for
each field, the default settings and a description of the field's function and any special information needed to help
understand the field's use. The default condition is no passwords required and no write protection.
Remember your passwords! If you set and forget your User and Master hard disk passwords, Fujitsu
■
Computer Systems will not be able to reset it. You may lose data and have to replace your system
board or hard disk drive.
WARNING. VERY IMPORTANT if your hard disk drive is protected using a Full Disk Encryption (FDE)
■
"engine". FDE encrypts all data as it is written to the hard drive. When data is retrieved from the
hard drive, it is decrypted by the same engine.
system with FDE, all data and applications on the hard drive will remain encrypted and will effec-
tively be lost.
Entering a password incorrectly 3 times in a row causes the keyboard and mouse to be locked out
■
and [System Disabled] to be displayed. If this occurs, restart the computer by turning off and on
the power with the power switch and use the correct password on reboot.
If you make an error when re-entering the password a Warning will be displayed. To try again press
■
[Enter], then retype the password, or press [Esc] to abort the password process.
If the Security Panel on Resume is Enabled and the Password on Boot is Disabled you will not have
■
to type your password upon resuming the system from the Suspend or Save-to-Disk modes. Power
Management Security will work only if Password boot is enabled.
Supervisor Password Is:
User Password Is:
Set Supervisor Password
Set User Password
Minimum User Password Length:
Password on Boot:
KB Lock on Resume:
Boot from Removable Media:
Flash Write:
Hard Disk Security
Owner Information
TPM (Security Chip) Setting
F1
ESC
18
Be sure to remember your hard disk password.
Phoenix SecureCore(tm) Setup Utility
Info
System
Advanced
On Automatic Wake up:
Help
Select Item
Exit
Select Menu
Figure 13. Security Menu
If you forget your hard disk security password on a
Security
Boot
Clear
Clear
[Enter]
[Enter]
[0]
[Disabled]
[Disabled]
[Disabled]
[All]
[Enabled]
-/Space
Change Values
Enter
Select Sub-Menu
Exit
Item Specific Help
Press <Enter> key to
set Supervisor Password
to enable any password
features.
Then password entry is
required to enter BIOS
Setup.
F9
Setup Defaults
F10
Save and Exit