Fujitsu CREMSON MODULAR STARTERKIT Gebruikershandleiding - Pagina 15

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Fujitsu CREMSON MODULAR STARTERKIT. Fujitsu CREMSON MODULAR STARTERKIT 36 pagina's.

Pagina afdrukken

Cremson Modular Starterkit

Chapter 3 Getting Started

If these settings are correct, start your debugging session :

First please make sure you are using the F369 CPU-board and your monitor-kernel is stored

in the flash memory of the MB91F369. Then please power up and reset the starterkit.

Start the debugger by double clicking the "MonDeb 57k6 COM1" entry in the project/debug

tree - or by using "Debug – Start Debug" from the menu. You should see a progress bar

indicating the download process.

If nothing happens, there will be an error message after some time ("Invalid communication

status"). Double-check the settings again as explained above. Also make sure the

evaluation-board is powered on, ready to use and the RS232-cable is connected properly.

Also see the trouble-shooting section in the appendix.

After starting the debugger, additional windows will appear which contain

locate-arrows for each (possible) source-line, the original source-code,

Figure 2: SWB Debugging window

breakpoint-indicators and the assembler code (in "mixed view"). The actual program position

will be indicated by a yellow line.

You can choose "mixed view" from the context menu (right-click) to display source

and assembly code at the same time. To easily locate the actual line, use "go to current" !

- 15 -