Fujitsu D1692 Technisch handboek - Pagina 27
Blader online of download pdf Technisch handboek voor {categorie_naam} Fujitsu D1692. Fujitsu D1692 35 pagina's. Mainboard
Pagina afdrukken
Here are a few key points to note before installing memory into your mainboard D1692.
•
Always install memory beginning with CPU0/DIMMA1 and CPU0/DIMMA2.
•
In order to access memory on CPU1; both processors must be installed.
•
Configure memory symmetrically for each CPU for best performance.
•
AMD OpteronTM processors support 64bit (non-interleaved) or 128bit (interleaved) memory
configurations (See chart).
•
At least one Registered DDR SDRAM module (CPU0/DIMMA1 or CPU0/DIMMB1) must be
installed for the system to turn on and POST (power on self test).
•
128MB, 256MB, 512MB, 1GB, and 2GB Registered PC2700/ PC2100/PC1600 DDR SDRAM
memory modules are supported.
•
All installed memory will be automatically detected.
•
The mainboard D1692 supports up to 8GB with two CPUs installed.
•
Use only identical DIMMs for one channel.
•
Memory must be installed in pairs of DIMMs (CPU0/DIMMA1 and CPU0/DIMMA2,
CPU0/DIMMB1 and CPU0/DIMMB2, CPU1/DIMMA1 and CPU1/DIMMA2, CPU1/DIMMB1 and
CPU1/DIMMA2).
!
Do not use PC3200 memory modules because they require another reference voltage.
Following memory configurations are allowed
i
X indicates a populated CPU socket or a populated DIMM Slot.
CPU0
CPU1
CPU0/
DIMMA1
X
X
X
X
X
X
A26361-D1692-Z120-1-7619
CPU0/
CPU0/
DIMMA2
DIMMB1
X
X
X
X
X
X
X
X
CPU0/
CPU1/
DIMMB2
DIMMA1
X
X
X
X
Add-on modules / Upgrading
CPU1/
CPU1/
DIMMA2
DIMMB1
X
X
X
X
CPU1/
DIMMB
X
X
17