Fujitsu D2671 Technisch handboek - Pagina 31

Blader online of download pdf Technisch handboek voor {categorie_naam} Fujitsu D2671. Fujitsu D2671 41 pagina's. For rx200 s4

Features

Proceed as follows to delete the CMOS settings:

Ê Create a backup of all the data.

Ê Shut down the server.

Ê Remove all power and connection cables.

Ê Remove the housing cover.

Ê Remove the PCI Riser card and, if required, all the additional cards which

hinder access to jumper JP2 (Clear CMOS).

Ê Remove jumper JP2 from position 1-2 and insert it in position 2-3 for 20 to

30 seconds.

Ê Insert jumper JP2 in position 1-2 again.

Ê Insert all the expansion cards and the PCI Riser card again.

Ê Close the server's housing cover.

Ê Connect all the power and connection cables again.

Ê Switch the server on again.

Ê During the POST process press [F2] in order to enter the Setup Utility.

Ê Press [F9] to set the system defaults.

Ê Press [F10] to save your changes and to exit the Setup Utility.

D2671 (RX200 S4)

Technical Manual

Ports and indicators