Fujitsu D2861 Technisch handboek - Pagina 14

Blader online of download pdf Technisch handboek voor {categorie_naam} Fujitsu D2861. Fujitsu D2861 40 pagina's. System board for for bx922 s2

CE Conformity

Instructions for handling boards

The specific instructions in the service article for the respective end device

must be observed when installing and removing the board.

Disconnect the device plug from the shock-proof socket before carrying out

any work on an installed board.

Exercise extreme care when installing and removing all boards.

Take care not to tilt boards; they must be installed perfectly straight.

If they are incorrectly handled, the boards and the components on them, or

the other components (e.g. EMI spring contacts) and conductors can be

damaged.

Handle all locking mechanisms (engaging lugs and centering pins) carefully

when installing/removing the board or components (e.g. memory modules,

processors).

Never use sharp objects (screwdrivers) as levers.

2.2

CE Conformity

The shipped version of this board complies with the requirements

of the EC directives 2004/108/EC "Electromagnetic

Compatibility" and 2006/95/EC "Low Voltage Directive". The

board therefore qualifies for the CE marking (CE=Communauté

Européenne).

Conformity has been tested in a typical configuration of a

PRIMERGY server.

Technical Manual

Important notes

D2861 (BX922 S2)