Fujitsu F2MC-8FX Series Toepassingsnotitie - Pagina 6

Blader online of download pdf Toepassingsnotitie voor {categorie_naam} Fujitsu F2MC-8FX Series. Fujitsu F2MC-8FX Series 23 pagina's. 8-bit microcontroller
Ook voor Fujitsu F2MC-8FX Series: Bedieningshandleiding (20 pagina's), Toepassingsnotitie (12 pagina's), Installatiehandleiding (18 pagina's), Installatiehandleiding (19 pagina's), Installatiehandleiding (30 pagina's), Toepassingsnotitie (20 pagina's), Toepassingsnotitie (21 pagina's), Bedieningshandleiding (21 pagina's), Installatiehandleiding (23 pagina's), Gebruikershandleiding (24 pagina's), Installatiehandleiding (17 pagina's)

2 Hardware Requirements

DEBUGGING TOOLS

This section describes the procedure for actual machine verification using the

emulator. The equipment used for explanation of the emulator is listed below:

• MB2146-09

• MB2146-301

• MB2146-303

• MB95FV100-101

• MB95FV100-103

• MB2146-401

• Crystal oscillator

• Power supply for MB2146-401 : 5 VDC

• USB(A-B) cable

Do only supply 5 volts DC to MB2146-401 evaluation board. Power supply is

directly connected to MCU board if jumper settings (JP3 & JP4) on evaluation

board are set to 5V. Higher voltage may damage MCU board, Evaluation board

and BGM adapter!

MCU-AN-395002-E-V10

MB2146-09 – Installation Guide

Chapter 2 Hardware Requirements

: BGM Adapter

: MCU board with MB95V100-101 (3V version)

: MCU board with MB95V100-103 (5V version)

: 3V evaluation chip

: 5V evaluation chip

: Evaluation board

: 4 MHz

: USB V1.1

Warning:

- 6 -