Fujitsu F2MC-8FX Series Bedieningshandleiding - Pagina 7

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Fujitsu F2MC-8FX Series. Fujitsu F2MC-8FX Series 21 pagina's. 8-bit microcontroller
Ook voor Fujitsu F2MC-8FX Series: Bedieningshandleiding (20 pagina's), Toepassingsnotitie (12 pagina's), Toepassingsnotitie (23 pagina's), Installatiehandleiding (18 pagina's), Installatiehandleiding (19 pagina's), Installatiehandleiding (30 pagina's), Toepassingsnotitie (20 pagina's), Toepassingsnotitie (21 pagina's), Installatiehandleiding (23 pagina's), Gebruikershandleiding (24 pagina's), Installatiehandleiding (17 pagina's)

3. Connections

■ Connecting the MCU board to the header board

Align the MCU board the header board facing each other, then plug their mating connectors together.

Those connectors are provided with incorrect insertion prevention guards located diagonally. Posi-

tion the two boards correctly so that the incorrect insertion prevention guards do not interfere with

each other and plug the connectors together completely (see "Figure 3").

■ Connecting the MCU board to the BGM adapter

Connect the BGM adapter to the MCU board. Plug the BGM adapter's interface connector complete-

ly into the BGM adapter connector on the MCU board with their index marks (▼) aligned (see "Fig-

ure 4").

BGM adapter

* : Be sure to connect the BGM adapter correctly to the BGM adapter connector (CN3) on the MCU board.

It can damage the MCU board if it is accidentally connected to the LVD2 detection voltage jumper plug

(S2).

Incorrect insertion

prevention guard

Figure 3 Connection of MCU board and header board

BGM adapter connector (CN3)

Figure 4 Connection of MCU board and BGM adapter

MCU board

SUB CLOCK

MAII N CLOCK

Index mark

LVD2 detection voltage jumper plug (S2) *

MCU board

Header board

LVD4

LVD3

LVD2

LVD1

LVD0

CLK

CLK S.V.

APB8

X0A

X1A

LVD1

OFF

LVD2