Fujitsu GA-8STXC P4 Titan-DDR Gebruikershandleiding - Pagina 19
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Fujitsu GA-8STXC P4 Titan-DDR. Fujitsu GA-8STXC P4 Titan-DDR 43 pagina's.
Pagina afdrukken
12) F_AUDIO_I (Front Audio Connector)
10 9
Rear Audio (L)
Rear Audio (R)
POWER
GND
2
13) SPDIF (SPDIF)
1
VCC
SPDIF Out
14) CD_IN (CD Audio In Connector)
CD_R
GND
CD_L
15) F_USB1 / F_USB2 (Front USB Connector)
(F_USB1 & F_USB2 connectors in yellow are for USB 2.0)
USB Dy+
USB Dy-
Power
1
Power
USB Dx-
USB Dx+
GA-8STXC Motherboard
Front Audio (L)
Reserved
Front Audio (R)
REF
MIC
1
GND
1
GND
USB Over
Current
GND
- 19 -
If you want to use Front Audio connector, you
must remove 5-6, 9-10 Jumper.
In order to utilize the front audio header, your
chassis must have front audio connector. Also
please make sure the pin assigment on the
cable is the same as the pin assigment on the
MB header. To find out if the chassis you are
buying support front audio connector, please
contact your dealer.
The SPDIF output is capable of providing
digital audio to external speakers or
compressed AC3 data to an external Dolby
Digital Decoder. Use this feature only when
your stereo system has digital input function.
6 Channel output : A "S/PDIF output" connec-
tor is available on the motherboard. Please
contact your nearest dealer for optional SPDIF
cable.
Connect CD-ROM or DVD-ROM audio out to
the connector.
Be careful with the polarity of the front panel
USB connector. Check the pin assignment
while you connect the front panel USB cable.
Please contact your nearest dealer for optional
front panel USB 2.0 cable.