Indesit BWE 71452 W UK N Beknopte handleiding - Pagina 3

Blader online of download pdf Beknopte handleiding voor {categorie_naam} Indesit BWE 71452 W UK N. Indesit BWE 71452 W UK N 4 pagina's.

Pagina afdrukken

Easy iron

By selecting this function, the wash and spin cycles will be modified in

order to limit the formation of creases. At the end of the cycle the

washing machine's drum will rotate slowly; the EASY IRON and START/

PAUSE

indicator lights will flash and the

steady. To end the cycle, press the START/PAUSE

IRON button.

Delay timer

To set a delayed start for the selected cycle, press the corresponding

button repeatedly until the desired delay period has been reached

(3h-6h-9h). When the button is pressed for the fourth time, the option will

deactivate.

Once the START/PAUSE

button has been pressed, the delay time can

only be modified by decreasing it until the set cycle is launched.

Temperature

Each wash cycle has a pre-defined temperature. To modify the

temperature, press the

button.

Spin

Each wash cycle has a pre-defined spin speed. To modify the spin speed,

press the

button.

PUSH & GO

To start the PUSH & GO cycle press and hold the relative button for

2 seconds. The lit indicator light indicates that the cycle has started.

This wash cycle is ideal for cotton or synthetic fabrics, as it washes at a

temperature of 30°C and a maximum spin speed of 1.000 rpm. Max load

3,5 kg (cycle duration 45').

How does it work?

1. Load the laundry (cotton and/or synthetic garments) and close the

door.

2. Pour the detergent and additives.

3. Start the cycle by pressing and holding the PUSH & GO button for 2

seconds. The relevant indicator light will turn green and the door will lock

(the

symbol lights up).

N.B.: starting the wash cycle through the PUSH & GO button activates

an automatic non-customisable cycle recommended for cotton and

synthetic fabrics. This cycle does not allow for setting any additional

options.

To open the door while an automatic cycle is under way, press the START/

PAUSE

button; if the locked door symbol is off, the door may be

opened. Press the START/PAUSE

the point at which it was interrupted.

4. Once the programme is finished, the

CHILD LOCK

to activate the control panel lock, press and hold the button for

approximately 2 seconds. The lit

panel is locked. This prevents wash cycles from being modified

accidentally (except for the ON/OFF

children in the home. To deactivate the control panel lock, press and hold

the button for approximately 2 seconds.

TIPS AND SUGGESTIONS

Divide the laundry according to:

Type of fabric (cotton, mixed fibres, synthetics, wool, garments to be

hand-washed). Colour (separate coloured garments from whites, wash

new coloured garments separately). Delicates (small garments – such as

nylon stockings – and items with hooks – such as bras: insert them in a

fabric bag).

Empty the pockets:

Objects such as coins or lighters can damage the washing machine and

the drum. Check all buttons.

Follow the dosage recommendation / additives

It optimizes the cleaning result, it avoids irritating residues of surplus

detergent in your laundry and it saves money by avoiding waste of

surplus detergent.

Use low temperature and longer duration

The most efficient programmes in terms of energy consumption are

generally those that perform at lower temperatures and longer duration.

Observe the load sizes

Load your washing machine up to the capacity indicated in the

"Wash Cycle Table" table to save water and energy.

Noise and remaining moisture content

They are influenced by the spinning speed: the higher the spinning speed

in the spinning phase, the higher the noise and the lower the remaining

moisture content.

CARE AND MAINTENANCE

Before performing cleaning and maintenance, switch the washing machine

off and disconnect it from the mains power. Do not use flammable liquids to

clean the washing machine. Clean and maintain your washing machine

periodically (at least 4 times per year).

Disconnect the water and power supplies

Close the water tap after every wash. This will limit wear on the hydraulic

system inside the washing machine and help to prevent leaks.

Unplug the washing machine when cleaning it and during all

maintenance work.

phase will remain lit

button or the EASY

button again to restart the cycle from

indicator light turns on.

symbol signals that the control

button), especially if there are

Clean the washing machine

The outer parts and rubber components of the appliance can be cleaned

using a soft cloth soaked in lukewarm soapy water. Do not use solvents or

abrasives.

The washing machine has a "Auto-clean" cycle for its internal parts; it must

be run without any load in the drum.

To optimise this cycle, it is possible to use either detergent (10% of the

quantity specified for lightly soiled garments) or special additives to clean

the washing machine. We recommend running a cleaning cycle every 40

wash cycles.

To start the cycle press buttons

5 seconds.

The cycle will start automatically and will run for about 70 minutes. To

stop the cycle, press the START/PAUSE

Clean the detergent dispenser drawer

Wash it under running water; this operation should be repeated

frequently.

Care for the door and drum

Always leave the porthole door ajar in order to prevent unpleasant odours

from forming.

Clean the pump

The washing machine is fitted with a auto-cleaning pump that does not

require any maintenance. Small items (such as coins or buttons) may

sometimes fall into the protective pre-chamber situated at the base of the

pump.

! Make sure the wash cycle has ended and unplug the appliance.

To access the pre-chamber:

1. remove the cover panel on the front of the machine by first pressing it

in the centre then pushing downwards on both sides to extract it;

2. loosen the drainage pump cover by turning it anti-clockwise: it is

normal for some water to leak out;

3. clean the inside thoroughly;

4. screw the cover back on;

5. put the panel back in place, making sure the hooks slot in place before

pushing the panel onto the appliance.

Check the water inlet hose

Check the water inlet hose at least once a year. If it is cracked or broken, it

must be replaced: during wash cycles, the high pressure of the water

could suddenly split the hose open.

! Never use hoses that have already been used.

LOAD BALANCING SYSTEM

Before every spin cycle, to avoid excessive vibrations and to distribute

the load in a uniform manner, the drum rotates continuously at a speed

which is slightly greater than the washing rotation speed. If, after several

attempts, the load is not balanced correctly, the machine spins at a

reduced spin speed. If the load is excessively unbalanced, the washing

machine performs the distribution process instead of spinning. To

encourage improved load distribution and balance, we recommend small

and large garments are mixed in the load.

ACCESSORIES

Contact our Technical Assistance Service to check whether the following

accessories are available for this washing machine model.

Stacking kit

With this accessory you can secure the tumble dryer to the upper part of

your washing machine to save space and facilitate loading and unloading

of the tumble dryer.

TRANSPORT AND HANDLING

Do not lift the washing machine by gripping it from the upper section.

Unplug the appliance and close the water tap. Check that the door and

detergent dispenser drawer are tightly closed. Detach the filling hose

from the water tap then detach the drain hose. Empty all the water

remaining in the hoses and secure the latter so that they do not get

damaged during transport. Apply the transport bolts back on. Repeat, in

reverse order, the transport bolt removal procedure described in the

"Health & Safety and Installation Guides".

and

simultaneously for

button.