Indesit SIXL145DUK Service Informatie Handleiding - Pagina 14
Blader online of download pdf Service Informatie Handleiding voor {categorie_naam} Indesit SIXL145DUK. Indesit SIXL145DUK 28 pagina's. Moon washing machines
Pagina afdrukken
Indesit
Company
THE CONDUCTIVITY SENSOR
THE VENT TUBE
Service Manual UK
The appliance is equipped with a conductivity sensor.
The sensor is located on the plastic tub next to the OKO
sump hose.
The sensor manages the 30 minute or daily programme.
The appliance does not have a pre-set fixed pH value:
During the first cycle after installation the machine runs an auto setting
cycle with 5 rinses which allows it to detect the water alkalinity and
calibrate itself. The auto setting cycle is repeated every 50 cycles.
During normal operation the machine will load with water and at this point
an alkalinity reading is taken by the sensor / software. If no alkalinity is
detected (detergent), the machine will activate the standard 30 minute
wash cycle.
If detergent is detected (from clothes that have been washed by hand),
2 x 15 minute rinse cycles will be activated.
14 of 28
The vent tube is connected to the part
of the tub where the water inlet
dispenser hose is normally connected;
at the other end the steam outlet hose
is located next to the water inlet valve.
Vent Tube
English