Indesit BAAN 40 FNF WD xx (TK) Gebruiksaanwijzing - Pagina 7

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Indesit BAAN 40 FNF WD xx (TK). Indesit BAAN 40 FNF WD xx (TK) 16 pagina's. Refrigerator/freezer combination
Ook voor Indesit BAAN 40 FNF WD xx (TK): Gebruiksaanwijzing (16 pagina's)

Pagina afdrukken

: Some models are fitted with a new odour filter

ODOUR FILTER

with active carbons, which ensures better air quality inside the

refrigerator.

The filter is located on the bottom right-hand side, inside the

ventilation opening.

Freezer compartment

ICE CARE tray

The fact that they are situated on the top part of the freezer

drawers ensures greater cleanliness: the ice no longer comes into

contact with the food placed inside the freezer compartment;

furthermore, the dripping of the water during filling is avoided (a lid

to cover up the hole after filling with water is also provided).

1. Pull out the tray by pushing it up.

Check that the tray is ompletely empty and fill it with water through

the opening provided.

2. Take care not to exceed the level indicated (MAX WATER

LEVEL). Excess water prevents the ice cubes from dispensing

(if this happens, wait for the ice to melt and empty the tray).

3. Turn the tray 90°: due to the connected compartments each

mould fills with water ( see diagram ).

4. Close the opening with the lid provided and put the tray back.

5. When the ice has formed (minimum time approximately 8 hours)

knock the tray against a hard surface and wet the outside so

that the ice cubes come loose and take them out through the

opening.

Start-up and use

Starting the appliance

! Before starting the appliance, follow the installation

instructions ( see Installation ).

! Before connecting the appliance, clean the compartments and

accessories well with lukewarm water and bicarbonate.

! The appliance comes with a motor protection control system

which makes the compressor start approximately 8 minutes after

being switched on. The compressor also starts each time the

power supply is cut off whether voluntarily or involuntarily

(blackout).

1. Set the FREEZER OPERATION knob on

2. Insert the plug into the socket and ensure that the green

POWER indicator light illuminates.

3. Turn the FREEZER OPERATION knob to an average value and

press the SUPER FREEZE button (rapid freezing): the SUPER

FREEZE indicator light will illuminate. Once the refrigerator has

reached the optimal temperature, the indicator light goes out

and you can begin food storage.

4. Turn the REFRIGERATOR OPERATION knob to an average

value. After a few hours you will be able to put food in the

refrigerator.

Chiller system

No Frost

The No Frost system circulates cold air continuously to collect

humidity and prevent ice and frost formation. The system maintains

an optimal humidity level in the compartment, preserving the

MAX

WATER LEVEL

original quality of the food, preventing the food from sticking

together and making defrosting a thing of the past. Do not block

the aeration cells by placing food or containers in direct contact

with the refrigerating back panel. Close bottles and wrap food

tightly.

Using the refrigerator to its full potential

• Use the REFRIGERATOR OPERATION knob to adjust the

temperature ( see Description ).

• Press the SUPER COOL button (rapid cooling) to lower the

temperature quickly. For example, when you place a large

number of new food items inside a fridge the internal

temperature will rise slightly. The function quickly cools the

groceries by temporarily reducing the temperature until it

reaches the ideal level.

• Place only cold or lukewarm foods in the compartment, not hot

foods ( see Precautions and tips ).

• Remember that cooked foods do not last longer than raw foods.

• Do not store liquids in open containers. They will increase

humidity in the refrigerator and cause condensation to form.