Indesit D2I HD526 UK Beknopte handleiding

Blader online of download pdf Beknopte handleiding voor {categorie_naam} Indesit D2I HD526 UK. Indesit D2I HD526 UK 2 pagina's.

Pagina afdrukken

Quick Guide

THANK YOU FOR BUYING AN INDESIT PRODUCT.

In order to receive a more complete assistance, please register

your appliance on: www.indesit.com/register

Before using the appliance carefully read Safety Instructions

guide.

CONTROL PANEL

On-Off/Reset button with indicator light

Program selection button

Salt refill indicator light

Rinse Aid refill indicator light

Program number and delay time indicator

Tablet (Tab) indicator light

Display

Push&GO button

FIRST TIME USE

FILLING THE SALT RESERVOIR

The use of salt prevents the formation of LIMESCALE on the dishes and on

the machine's functional components.

• It is mandatory that THE SALT RESERVOIR NEVER BE EMPTY.

• It is important to set the water hardness.

The salt reservoir is located in the lower part of the dishwasher

(see PRODUCT DESCRIPTION) and must be filled when the SALT REFILL

indicator light

in the control panel is lit.

1. Remove the lower rack and unscrew the reservoir cap

(anticlockwise).

2. Only the first time you do this: fill the salt reservoir

with water.

3. Position the funnel (see figure) and fill the salt reservo-

ir right up to its edge (approximately 1 kg); it is not

unusual for a little water to leak out.

Remove the funnel and wipe any salt residue away from the opening.

Make sure the cap is screwed on tightly, so that no detergent can get into

the container during the wash program (this could damage the water so-

ftener beyond repair).

Whenever you need to add salt, it is mandatory to complete the

procedure before the beginning of the washing cycle to avoid corrosion.

FILLING THE RINSE AID DISPENSER

Rinse aid makes dish DRYING easier. The rinse

aid dispenser A should be filled when the

RINSE AID REFILL indicator light

control panel is lit.

NEVER pour the rinse aid directly into the

appliance tub.

PROGRAMS TABLE

Program

Eco 50°- Eco program is suitable to clean normally soiled tableware,

that for this use, it is the most efficient program in terms of its com-

bined energy and water consumption, and that it is used to assess

compliance with the EU Ecodesign legislation.

Intensive 65° - Program recommended for heavily soiled crocke-

ry, especially suitable for pans and saucepans (not to be used for

delicate items).

Mixed 55° - Mixed soil. For normally soiled dishes with dried food re-

sidues.

Fast&Clean 28' 50°

iled dishes with no dried food residues. Does not have drying phase.

Night 50°

Suitable for night-time operation of the appliance.

Ensures optimal cleaning and drying performance with the lowest

noise emission.

Extra Hygiene 65°- Normally or heavily soiled crockery, with additional

antibacterial wash. Can be used to perform maintenance of the dishwa-

sher.

Prewash - Use to refresh crockery planned to be washed later. No

detergent to be used with this program.

Self Clean 65°- Program to be used to perform maintenance of the

dishwasher, to be carried out only when the dishwasher is EMPTY

using specific detergents designed for dishwasher maintenance.

Push&GO 50° - Everyday wash and dry cycle that ensures great cleaning

performance in a short time without the need to pre-treat dishes.

10. START/Pause button with indicator light/ Tablet (Tab)

Programs description

Program to be used for half load of lightly-so-

PLEASE SCAN THE QR CODE ON YOUR

APPLIANCE IN ORDER TO HAVE MORE

DETAILED INFORMATION

3 4

6 7

Delay button

FILLING THE DETERGENT DISPENSER

To open the detergent dispenser use the opening device C. Introduce the

detergent into the dry dispenser D only. Place the amount of detergent for

pre-washing directly inside the tub.

The detergent dispenser automatically opens up at the right time

according to the program.

If all-in-one detergents are used, we recommend using the TABLET button,

because it adjusts the program so that the best washing and drying results

are always achieved.

Usage of detergent not designed for dishwashers may cause malfunc-

tion or damage to the appliance.

WATER SOFTENING SYSTEM

Water softener automatically reduces water hardness, consequently pre-

venting scale buildup on heater, contributing also to better cleaning efficiency.

This system regenerates itself with salt, therefore it is required to refill

salt container when empty.

Frequency of regeneration depends on water hardness level setting - regen-

eration takes place once per 6 Eco cycles with water hardness level set to 3.

Regeneration process starts in final rinse and finishes in drying phase, be-

fore cycle ends.

• Single regeneration consumes: ~3.5L of water;

• Takes up to 5 additional minutes for the cycle;

• Consumes below 0.005kWh of energy.

in the

Available

options

Duration

Water

of wash

consumption

program

(litres/cycle)

(h:min)

**)