Indesit HOTPOINT LUCE DX1032CX Servicehandleiding - Pagina 31
Blader online of download pdf Servicehandleiding voor {categorie_naam} Indesit HOTPOINT LUCE DX1032CX. Indesit HOTPOINT LUCE DX1032CX 39 pagina's. Built-in touch control electronic multifunction 60 cm double oven
Pagina afdrukken
Indesit
Company
6)
Main Power Board
1.
Remove the top panel as in 1).
2.
Depress the tabs securing the power board to the mounting bracket.
3.
Noting all the connections, lift the power board away.
4.
Reassembly in reverse order.
7)
To Access the Lamp Body & Fan Motor
1.
Remove the top panel as in 1).
2.
Remove the rear panel 4 screws.
8)
To Access the Door Microswitch, Main Oven & Top Oven Base Elements
1.
Remove the rear panel, 4 screws).
2.
Remove the right hand side panel 5 screws.
9)
Light Assembly - Top and Main Ovens
1.
The oven bulb can be accessed by removing the glass lens anticlockwise and unscrewing the bulb
anti-clockwise.
2.
The oven light assembly can be removed after removing the rear panel as in 6).
3.
Disconnect the wires then squeeze together the retaining lugs then push the assembly into the
oven cavity.
4.
Reassemble in reverse order.
10) Oven Fan & Motor
1.
The main oven fan motor is removed via the inspection panel located at the base of the rear panel.
2.
Remove the product from its housing as in 1 and snip the inspection panel from the rear panel in
5 places.
3.
Remove the main oven door as in 15).
4.
Remove the main oven furniture.
5.
Remove the fan by turning the hexagonal nut clockwise using a 10 mm spanner.
6.
Remove the screw located at the 6 o'clock position and slacken the screws located at the
10 and 2 o'clock positions.
7.
Lift the fan assembly off the key hole slots and remove from the rear of the product, taking care
not to damage the gasket.
8.
Disconnect the wires noting their positions.
9.
Reassemble in reverse order ensuring that the fan motor insulation is fitted and that the fan is
evenly tightened.
10. Replace the fan motor cover on the rear panel using 5 screws 6 x 10, Part Number C00195153.
11) Door Switch
1.
Remove the right hand side panel, 5 screws).
2.
Remove the 2 screws securing the door switch.
3.
Disconnect the wires noting their positions.
4.
Reassemble in reverse order.
Service Manual UK
31 of 39
English