Indesit IT50E1 Gebruiksaanwijzing - Pagina 7

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Indesit IT50E1. Indesit IT50E1 20 pagina's. 50cm free standing electric cooker

Pagina afdrukken

Hotplate

Use of Hotplates

Note:

Under no circumstances should the hob be

used with aluminium foil in contact with the

hob surface.

The controls set the hotplates at six pre-set

power levels. Each control can be used to

select one of six temperature settings from a

minimum at position 1 to a maximum at

position 6.

Do Not leave a hotplate switched on without

a pan as this wastes energy and may shorten

the life of the hotplate.

CONTROL SETTINGS GUIDE

This is provided only as a guide – settings also

depend on the type of pan used and the quality of

food.

Knob Position Type of food

Safety requirements for deep fat frying

1. Use a deep pan, large enough to completely

cover the appropriate heating area.

2. Never fill the pan more than one-third full of oil.

3. Never leave oil or fat unattended during the

heating or cooking period.

4. Never try to fry too much food at a time,

especially frozen food. This only lowers the

temperature of the oil or fat too much, resulting in

greasy food.

5. Always dry food thoroughly before frying, and

lower it slowly into the hot oil or fat. Frozen foods,

in particular, will cause frothing and spitting, if

added to quickly.

6. Never heat fat, or fry, with a lid on the pan.

7. Keep the outside of the pan clean and free from

streaks of oil or fat.

Practical advice on using the hob

• Use pans with a thick, flat base to ensure that

they adhere perfectly to the cooking zone.

• Always use pans with a diameter that is large

enough to cover the hotplate fully, in order to use

all the heat produced.

• Always make sure that the base of the pan is

completely clean and dry: this ensures that the

pans adhere perfectly to the cooking zones and

that both the pans and the hob remain effective

for a longer period of time.

• Avoid using the same cookware that is used on

gas burners: the heat concentration on gas

burners may have warped the base of the pan,

causing it not to adhere to the surface correctly.

• Never leave a cooking zone switched on without a

pan on top of it, as doing so may cause the zone

to become damaged.