Indesit KP100CX Handleiding voor installatie en gebruik - Pagina 16
Blader online of download pdf Handleiding voor installatie en gebruik voor {categorie_naam} Indesit KP100CX. Indesit KP100CX 24 pagina's. Indesit free standing electric cooker instruction for installation & use
Pagina afdrukken
- 1. Table of Contents
- 1. Introduction
- 2. For Your Safety
- 2. Clock / Minute Minder Operation
- 2. Setting the Time of Day
- 2. Setting the Minute Minder
- 2. Using the Hob
- 2. Twin Grill
- 2. Ovens
- 2. Oven Cooking Charts
- 2. Care and Cleaning
- 3. Installations
- 3. Installation Instructions
- 3. Something Wrong with Your Cooker
- 3. If It Still Won't Work
- 3. Key Contacts
Care and Cleaning
GRILL
Remove the grill pan and the wire grid food support, it is best to wash these items
immediately after each use to prevent stains from being burnt on when used again.
Wipe out the Grill compartment, use a fine steel wool soap pad to remove stubborn
stains from the grill deflector plate and the floor of the compartment.
MAIN OVEN DOORS
1. Glass Door – open the oven door fully. The glass panel may now be cleaned.
Stubborn stains can be removed by using a fine steel wool soap pad.
Do not use scouring pads, or abrasive powder, which will scratch the glass.
Ensure that the glass panel is not subjected to any sharp mechanical blows.
For slight soiling the inner glass panel may be cleaned, while still warm.
For removing stubborn stains see page 16, cleaning.
2. Remove the rod shelves and meat pan.
Use a fine steel wool soap pad to remove stubborn stains from the rod shelves, meat
pan and the floor of the oven. Refer to the instructions on page 14 for cleaning the
shelf supports.
Do not use aerosol cleaners on this oven as they could adversely affect the fan motor
unit, and cannot be wiped off the fan blade.
Replacement oven lamp:
WARNING: To avoid electric shocks - please ensure that the electricity supply to the
appliance is switched off and the appliance is fully cold, before removing the lamp lens.
Open the oven door and remove the rod shelves.
Using a suitable cloth to protect the fingers grip the light glass dome, unscrew anti-
clockwise and lift.
Reach into the aperture and unscrew the lamp anti-clockwise.
Fit replacement lamp (15W 300°C rated SES), refit dome.
16