Indesit Ecotime IWDD 75125 UK N Beknopte handleiding - Pagina 2
Blader online of download pdf Beknopte handleiding voor {categorie_naam} Indesit Ecotime IWDD 75125 UK N. Indesit Ecotime IWDD 75125 UK N 4 pagina's.
Pagina afdrukken
WASH CYCLES
Follow the instructions on the symbols of the garment's wash
care label. The value indicated in the symbol is the maximum
recommended temperature for washing the garment.
White
extremely soiled whites.
Mix Colours
A 40°C cycle that helps to preserve colours, suitable for cotton or
synthetic coloured garments. It allows for reducing electricity
consumption for heating the water while guaranteeing good washing
results. Suitable for lightly soiled garments.
Synthetics
Specific for synthetic items. If the dirt is difficult to remove, the temperature
can be increased up to 60° and powder detergent can be used too.
Cotton
Suitable for washing towels, underwear, table cloths, etc. made of
resistant linen and cotton that are moderately to heavily soiled.
Silk & Delicates
To wash all silk and delicate garments. We recommend the use of special
detergent which has been designed to wash delicate clothes.
Wool
all wool garments can be washed using programme 6, even those
carrying the "hand-wash only"
detergents and do not exceed 2 kg of laundry.
Jeans
turn garments inside-out before washing and use a liquid detergent.
Sport Intensive
is for washing heavily soiled sports clothing fabrics (tracksuits, shorts,
etc.); for best results, we recommend not exceeding the maximum load
indicated in the "Wash Cycle Table".
Eco 40-60
For washing normally soiled cotton garments declared to be washable at
40 °C or 60 °C, together in the same cycle. This is the standard cotton
programme and the most efficient in terms of water and energy
consumption.
20°C
For washing lightly soiled cotton garments, at a temperature of 20 °C.
Cotton Dry
designed
for drying cotton fabrics.
Synthetics Dry
designed
for drying Synthetics fabrics.
Express Wash&Dry
was designed to wash and dry lightly soiled garments quickly. This cycle
may be used to wash and dry a laundry load of up to 0.5 kg in just 30
minutes. To achieve optimum results, use liquid detergent and pre-treat
cuffs, collars and stains.
Rinse
designed for rinsing and
spinning.
Spin
designed to spin and drain the water.
Drain
designed for
draining the water.
DISPLAY
The display is useful when programming the machine and provides a lot
of information.
The duration of the available programmes and the remaining time of a
running cycle appear in section A; if the DELAY START option has been
set, the countdown to the start of the selected programme will appear.
Furthermore, pressing the corresponding button allows you to view the
maximum temperature, spin speed and drying level or time values
attained by the machine during the selected cycle.
The "washing phases" relative to the selected cycle and the "washing
phase" of the running cycle appear in section B:
Wash
Rinse
Spin / Drain
Drying
label. For best results, use special
B
A
C
The icons corresponding to "temperature"
appear in section C from top to bottom:
If the
symbol lights up, the display will visualise the set "temperature"
value.
The
symbol lights up while the drying settings are being adjusted.
If the
symbol lights up, the display will visualise the set "spin" value.
DOOR LOCKED INDICATOR
When lit, the symbol indicates that the door is locked. To prevent any
damage, wait until the symbol turns off before opening the door.
To open the door while a cycle is in progress, press the START/PAUSE
button
; if the
symbol is off, the door can be opened.
FIRST-TIME USE
Once the appliance has been installed, and before it is used for the first time,
run a wash cycle with detergent and no laundry, by setting the "1" cycle.
DAILY USE
Prepare the laundry by following the suggestions appearing under the
"TIPS AND SUGGESTIONS" section.
- Press the ON/OFF button
; the START/PAUSE
flash slowly green.
- Open the door. Load the laundry while making sure not to exceed the
maximum load quantity indicated in the Wash Cycle Table.
- Pull out the detergent dispenser drawer and pour the detergent into the
relevant compartments as described in "DETERGENT DISPENSER DRAWER"
section.
- Close the door.
- Set the WASH CYCLE knob to the desired programme; a temperature and
spin speed is set for each wash cycle; these may be adjusted. The duration
of the cycle will appear on the display.
- Modify the temperature and/or spin speed: The machine automatically
displays the maximum temperature and spin speed values set for the
selected cycle, or the most recently-used settings if they are compatible
with the selected cycle. The temperature can be decreased by pressing
the
button, until the cold wash "OFF" setting is reached. The spin speed
may be progressively reduced by pressing the
completely excluded (the "OFF" setting). If these buttons are pressed
again, the maximum values are restored.
- Set the drying cycle if necessary.
- Select the desired options.
- Press the START/PAUSE
button to start the wash cycle; the relative
indicator light will light up steady green and the door will lock (
PAUSING A CYCLE
To pause the wash cycle, press the START/PAUSE
indicator light will flash amber. If the
opened. To start the wash cycle from the point at which it was
interrupted, press the START/PAUSE
OPENING THE DOOR, IF NECESSARY
Once a cycle starts, the
symbol turns on to signal that the door cannot
be opened. While a wash cycle is running, the door remains locked. To
open the door while a cycle is under way, for example, to add or remove
garments, press the START/PAUSE
indicator light will flash amber. If the
opened. Press the START/PAUSE
CHANGING A RUNNING WASH CYCLE
To change a wash cycle while it is in progress, pause the washer-dryer
using the START/PAUSE
button (the relative indicator light will flash
amber), then select the desired cycle and press the START/PAUSE
button again.
! To cancel a cycle that has already begun, press and hold the ON/OFF
button. The cycle will be stopped and the machine will switch off.
END OF THE CYCLE
This will be indicated by the text "End" on the display; when the
switches off, the door may be opened. Open the door and switch off the
machine. If you do not press ON/OFF
switch off automatically after about a 10 minutes. Close the water tap and
unload the washer-dryer. Leave the door ajar to allow the drum to dry.
OPTIONS
- If the selected option is not compatible with the programmed wash
cycle, the indicator light will flash and the option will not be activated.
- If the selected option is not compatible with another option which
has been selected previously, the indicator light corresponding to the
first option selected will flash and only the second option will be
activated; the indicator light corresponding to the enabled option will
remain lit.
Time Saver
Selecting this option enables you to suitably adjust drum rotation,
temperature and water to a reduced load of lightly soiled cotton and
synthetic fabrics. Time Saver enables you to wash in less time thereby
saving water and electricity. We suggest using a liquid detergent suitably
measured out to the load quantity.
, "Drying"
and "spin"
indicator light will
button, until it is
symbol on).
button again; the
symbol is not lit, the door may be
button again.
button to pause the cycle; the
symbol is not lit, the door may be
button again to continue the cycle.
button, the washer-dryer will
symbol