Indesit IO 632 CC RFH Gebruiksaanwijzing - Pagina 8

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Indesit IO 632 CC RFH. Indesit IO 632 CC RFH 20 pagina's.

Pagina afdrukken

The FlexiZONE mode

The FLEXI Zone can be used to set the power of two

„interconnected" hotplates to the same level. It can be

activated if the two hotplates are OFF, by pressing the

FLEXI ZONE button

The FLEXI ZONE can be activated while the hob is on

by pressing the FLEXI ZONE button once; the LEDs

corresponding to both linked hotplates light up.

The 2 LEDs remain lit as long as the hotplates are

linked (if FLEXI ZONE button is pressed again, the

hotplates are disconnected and are both set to power

level 0).

Pressing the +, - or Max buttons for one of the two Flexi

hotplates also affects the display corresponding to the

other hotplate.

To deactivate the FLEXI ZONE, press the button

A timer may be set for the FLEXI zone; this appears on

the display and both LEDs corresponding to the linked

hotplates light up. When the Timer button is pressed,

the two linked hotplates are treated as if they were a

single zone.

Selecting and using FLEXI ZONE

To begin using the FLEXI ZONE, press the

To set the power level (see above).

FLEXI ZONE operation

Once you have selected FLEXI ZONE by pressing

the button , the 2 LEDs corresponding to the FLEXI

ZONE for both hotplates light up; it will then be possible

to control both as if they were a single zone. The power

level will appear on both displays. If only the upper or

lower part is in use, the display corresponding to the

unused zone will begin to ﬂ ash, and after 3 minutes

cooking will automatically revert to standard mode (not

FLEXI).

! Once activated, the FLEXI ZONE can also be

programmed, using the same procedure as described

for the individual hotplates.

! Accessories

For optimal FLEXI ZONE performance, we recommend

the use of pans with an elliptical or elongated base and

a major diameter of at least 250 mm; if using pans with

a smaller diameter, we recommend positioning them in

the upper or lower part as indicated by the X symbol.

If the saucepan is not in the centre of the screen

printing detail, you may hear a whistling sound or

a slight buzzing noise; this does not indicate a hob

malfunction. We recommend adjusting the position of

the pan so that it is in the centre of the FLEXI ZONE.

Practical cooking advice

•

button.

™

Pressure cooking

Frying

Pressure cooker

Grilling

Boiling

Crêpes

Cooking on a high flame and browning

(roasts, steaks, escalopes, fish fillets,

fried eggs)

Fast thickening (liquid juices)

Boiling water (pasta, rice, vegetables)

Milk

Slow thickening (dense juices)

Bain-marie cooking

Pressure cooking after whistle

Low-flame cooking (stews)

Reheating dishes

Chocolate sauce

Keeping food hot