Indesit KIA 641 C Servicehandleiding - Pagina 15

Blader online of download pdf Servicehandleiding voor {categorie_naam} Indesit KIA 641 C. Indesit KIA 641 C 19 pagina's.

Pagina afdrukken
Indesit KIA 641 C Servicehandleiding
FAULT
SUBCODE
F12
1
F13
1
F14
1
F15
1
F16
1
F17
1
1
F18
F19
1
Remark:
•
The Fault marked in black on white background are referred to both the typology of hob
(Radiant and Induction). All the other Fault are referred only to the Induction Hobs.
Service Manual
Induction hob manual
DESCRIPTION
ISI UART 1 (CN 03): Too high tempe-
rature of the heat-sink
ISI UART 2 (CN 04): Too high tempe-
rature of the heat-sink
ISI UART 1 (CN 03): Too high tempe-
rature of the large hob
ISI UART 1 (CN 04): Too high tempe-
rature of the small hob
ISI UART 2 (CN 04): Too high tempe-
rature of the large hob
ISI UART 2: Too high temperature of
the small hob
Communication VISUAL BOARD
UART1 <--> EXTERNAL BOARD
Communication VISUAL BOARD
UART2 <--> EXTERNAL BOARD
CHECK ACTIONS
3. Verify that heat-sink NTC is calibrated.
4. Replace the corresponding generator board.
1. Verify that the fan is correctly wired and that the wiring is intact.
2. Verify that the fan is operative, setting the maximum power.
3. Verify that heat-sink NTC is calibrated.
4. Replace the corresponding generator board.
1. Verify that inductor NTC is calibrated.
2. Replace the inductor.
3. Replace the power board.
1. Verify that inductor NTC is calibrated.
2. Replace the inductor.
3. Replace the power board.
1. Verify that inductor NTC is calibrated.
2. Replace the inductor.
3. Replace the power board.
1. Verify that inductor NTC is calibrated.
2. Replace the inductor.
3. Replace the power board.
1. Power off the appliance, wait 3 minutes and power it on.
2. Check the communication wires of the boards.
3. Check continuity of UART1 wire (CN03)
4. Replace the Display board
5. Replace the power board
6. Power off the appliance, wait 3 minutes and power it on.
1. Check the communication wires of the boards.
2. Check continuity of UART2 wires (CN04)
3. Replace the Display board
4. Replace the power board
Edition
2008.03.01
15
Language
English