Indesit VRH 600 C Gebruiksaanwijzing - Pagina 3

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Indesit VRH 600 C. Indesit VRH 600 C 48 pagina's.

Pagina afdrukken

Fixing

The appliance must be installed

supporting surface.

Any deformities caused by improper fixing could affect

the features and operation of the hob.

The thickness of the supporting surface

into account when choosing

the fixing hooks:

• 30 mm thick: 17.5 mm screws

• 40 mm thick: 7.5 mm screws

Fix the hob as follows:

1. Use short flat-bottomed screws to fix the 4 alignment

springs in the holes provided at the central point of

each side of the hob.

2. Place the hob in the cavity, make sure it is in a

central position and push down on the whole perimeter

until the hob is stuck to the supporting surface.

3. For hobs with raised sides: After inserting the hob

into its cavity, insert the 4 fixing hooks (each has its

own pin) into the lower edges of the hob, using the

long pointed screws to fix them in place, until the glass

is stuck to the supporting surface.

The screws for the alignment springs must remain

accessible.

In order to adhere to safety standards, the appliance

must not come into contact with electrical parts once it

has been installed.

All parts which ensure the safe operation of the

appliance must not be removable without the aid of a

tool.

Connecting the hob to the oven

This appliance can only work if it has been connected

to a specific oven, listed on the sheet included in the

documents pouch.

VRH 600 C - VRH 600 X - VRH 640 C - VRH 640 X -

VRH 60 C - VRH 60 X

on a perfectly level

should be taken

the length of the screws for

PIANO INCASSO

BIANCO

ROSSO GIALLO BLU

CUCINA INCASSO

VRH 641 D C - VRH 642 DO X

BUILT-IN CERAMIC HOBS

BLUE

WHITE

RED

OVEN

VERDE

YELLOW

GREEN