AEG ARCTIS 1283-7 GS Gebruiksaanwijzing - Pagina 15

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} AEG ARCTIS 1283-7 GS. AEG ARCTIS 1283-7 GS 28 pagina's. Table top electronic freezer

Pagina afdrukken

The temperature display switches over and the DESIRED temperature

currently set flashes on the temperature display.

Set the required temperature by pressing the „+" (WARMER) or „-"

(COLDER) buttons (see section "Temperature setting buttons"). The

temperature display will immediately show the changed setting. With

each further press of one of the two buttons, the DESIRED tempera-

ture is adjusted by one display field.

The temperature is fixed to -18°C.

From a food safety point of view -18°C should be considered suffi-

ciently cold for storing food in the freezer.

Once the required temperature has been set, after a short period

(approx. 5 sec.) the temperature display will change and again indicate

the current ACTUAL temperature inside the fridge. The display will

change from flashing to continuous illumination.

The compressor will start and then run automatically.

Information! When the setting is changed, the compressor does not

start immediately if automatic defrosting is currently taking place.

As the storage temperature within the freezer is reached quickly you

can store food immediately after switching on.

FROSTMATIC

FROSTMATIC button

FROSTMATIC

The FROSTMATIC function is switched on by pressing the FROSTMATIC

button. The yellow light illuminates. If the FROSTMATIC function is not

ended manually, the appliance electronics switch off the FROSTMATIC

function after 48 hours. The yellow light goes out.

The FROSTMATIC function can be ended manually at any time by pres-

sing the FROSTMATIC button again. The yellow light goes out.

The FROSTMATIC function accelerates the freezing of

fresh food and, at the same time, protects foodstuffs

already stored from undesirable warming.

FROSTMATIC