AEG SANTO C 7 18 40-4I Bedienings- en installatie-instructies - Pagina 25

Blader online of download pdf Bedienings- en installatie-instructies voor {categorie_naam} AEG SANTO C 7 18 40-4I. AEG SANTO C 7 18 40-4I 28 pagina's. Integrating fridge freezer
Ook voor AEG SANTO C 7 18 40-4I: Bedienings- en installatie-instructies (15 pagina's), Bedienings- en installatie-instructies (28 pagina's), Bedienings- en installatie-instructies (24 pagina's), Bedienings- en installatie-instructies (25 pagina's), Bedienings- en installatie-instructies (28 pagina's), Bedienings- en installatie-instructies (32 pagina's), Bedienings- en installatie-instructies (32 pagina's), Bedienings- en installatie-instructies (14 pagina's), Gebruikershandleiding (44 pagina's)

Pagina afdrukken
AEG SANTO C 7 18 40-4I Bedienings- en installatie-instructies
Place guide (A) on the inside part of
the furniture door, in the upper and
lower positions as shown in the fig-
ure and mark the position of external
holes. Having drilled the holes, fix the
A
guide with the screws supplied.
PR166
Fix cover (C) on guide (A) until it clips
into place.
A
C
PR33
Open the appliance door and the fur-
niture door at 90°. Insert the small
8mm
square (B) into guide (A). Put togeth-
er the appliance door and the furni-
ture door and mark the holes as indi-
cated in the figure. Remove the
squares and drill holes with ø 2 mm
at 8 mm from the outer edge of the
door. Place the small square on the
A
guide again and fix it with the screws
supplied.
B
PR167
25