AEG 220 D Handleiding voor installatie en gebruik - Pagina 4

Blader online of download pdf Handleiding voor installatie en gebruik voor {categorie_naam} AEG 220 D. AEG 220 D 17 pagina's. Fume extractor hood

Introduction

The hood is supplied as an extractor unit and can also be

used with a filtering function by fitting activated carbon

filters (special accessory).

The unit features two outlet holes, one of which A is

located on the top of the unit while the other B is located

on the rear.

To connect up the hose, you should first fit the bayonet-

mounting flange C (Ø120 mm) on the outlet required (if

using the top outlet, fix the flange in place using the screw

supplied as shown in Fig. 1).

Close off the unused hole using the bayonet fitting caps D.

Important! To use the back hole B, remove switch F from

the top hole. — Fig 2.