AEG 240 D Bedienings- en installatie-instructies - Pagina 20

Blader online of download pdf Bedienings- en installatie-instructies voor {categorie_naam} AEG 240 D. AEG 240 D 22 pagina's.

Maintenance and care

• The hood must always be disconnected from the mains power

supply before beginning any maintenance work.

• Failure to observe the instructions on cleaning the unit and

changing the filters will cause a fire hazard. You are therefore

strongly recommended to follow these instructions.

• Disconnect the unit from the mains power supply.

• Open the metal grease filter.

• Replace the faulty lamp with one of equal kind and rating.

• If the light does not come on, make sure the bulb has been

screwed in correctly before contacting the technical assistance

service.

• Warning: always disconnect the hood from the mains power supply

before cleaning it.

Never insert pointed objects in the motor's protective grid.

• Wash the outside surfaces using a delicate detergent solution.

Never use caustic detergents or abrasive brushes or powders.

• Only ever clean the switch panel and filter grille using a damp cloth

and delicate detergents.

• It is extremely important to clean the unit and change the filters at

the recommended intervals. Failure to do so will cause grease

deposits to build up that could constitute a fire hazard.