AEG 2600 D Bedienings- en installatiehandleiding - Pagina 7
Blader online of download pdf Bedienings- en installatiehandleiding voor {categorie_naam} AEG 2600 D. AEG 2600 D 16 pagina's.
Ook voor AEG 2600 D: Bedienings- en installatie-instructies (20 pagina's)
After approximately three years of use, the KF8 filter should be replaced with
a new, as the odour reduction capacity will be reduced.
To remove the filter (Fig. 4):
Remove the grease filters.
Press the red buttons (A), lower the front of the carbon filter.
Remove the carbon filter.
Replace in reverse order.
Fig. 4
Clean the filters regularly. The grease that collects in the filters
and the duct could ignite if a hot plate is left on (or if overheating
occurs).
Remove the upper glass panel
The upper glass panel can be removed for cleaning (Fig. 5):
Remove the grease filters
Pull the handle L down
Remove the glass panel
Fig. 5
Changing the light
Disconnect the cooker hood from the main supply before changing the light.
To change the light (Fig. 6):
Remove the lamp cover, use a screw driver.
Replace the old bulb with a new one of the same type.
Remount the lamp cover.
Fig. 6
A
A
L
7