AEG 2600 D Bedienings- en installatie-instructies - Pagina 7

Blader online of download pdf Bedienings- en installatie-instructies voor {categorie_naam} AEG 2600 D. AEG 2600 D 20 pagina's.
Ook voor AEG 2600 D: Bedienings- en installatiehandleiding (16 pagina's)

AEG 2600 D Bedienings- en installatie-instructies

Control Panel

• Best result are obtained by using a low speed for normal conditions
and a high speed when odours are more concentrated.
Turn the hood on a few minutes before you start cooking, you will
then get an under pressure in the kitchen. The hood should be left on
after cooking for about 15 minutes or until all the odours have
disappeared.
The control switches are located on the unit's front panel:
A -
Main switch, hood on/off.
B -
Start and choice of motor speed 1-2-3-1-2.........
C -
Indicates speed 1 (LED) and indication of the grease
saturation for the filter (flashing indicator).
D -
Indicates speed 2 (LED) and indication of the charcoal
saturation for the filter (flashing indicator).
E -
Indicates speed 3 (LED)
F -
Indicates Intensive speed (LED).
G -
Intensive speed on/off. The Intensive speed runs for 5
minutes:
If the hood is on when the Intensive speed is activated, the
hood reverts to previous speed after 5 minutes.
If the hood is off when the Intensive speed is activated, the
hood will be turned off after 5 minutes.
To interrupt the Intensive speed, press button A or B.
H -
Light ON/OFF
Should the hood or the controls fail to operate: disconnect the power
supply for at least 5 seconds, then turn the hood back on again.
7