Kohler 00885612734488 Installatiehandleiding - Pagina 3
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Kohler 00885612734488. Kohler 00885612734488 41 pagina's. Centerset bathroom sink faucet
Pagina afdrukken
1. Faucet Installation
NOTE: Before drilling the mounting hole, use the following
dimensions for proper placement:
A 1-1/4" (32 mm) minimum to 1-1/2" (38 mm) maximum
diameter mounting hole is required.
A minimum distance of 1-3/4" (44 mm) is required between the
back of the spout and the wall to allow access to the screw.
A 1-1/8" (29 mm) maximum distance is required between the
sink bowl edge and the base of the spout.
Install the Faucet
Determine the mounting-hole location.
Drill a hole through the mounting surface according to the
surface manufacturer's instructions.
Slide the O-ring over the flexible hoses and stud, then seat the
O-ring into the groove on the underside of the spout.
Insert the spout with flexible hoses and stud through the
mounting hole.
From under the sink, slide the rubber washer and bracket onto
the stud.
Thread the nut onto the stud and wrench-tighten to secure the
faucet to the mounting surface.
Kohler Co.
Spout
Sensor
O-Ring
Stud
Rubber
Bracket
Washer
Nut
Flexible Hoses
3
1357694-2-A