A-Neuvideo ANI-0108HBC Gebruiksaanwijzing - Pagina 5

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} A-Neuvideo ANI-0108HBC. A-Neuvideo ANI-0108HBC 8 pagina's. Hdmi 1x8 splitter over cat5e/6 extender

Pagina afdrukken
A
NEUVIDEO
Splitter
POWER SWITCH:
Power ON\OFF Switch.
q
POWER LED:
This red LED illuminate when the device is connected with power supply.
w
IR IN:
IR Control System over CAT5e/6 Cable IR Receiver. Source to SINK, plug Wideband IR Rx into this unit.
e
IR OUT:
IR Control System over CAT5e/6 Cable IR Transmitter. SINK to Source, plug Wideband IR Tx into this unit.
r
EDID Selector:
Select output signal format via EDID Selector.
t
UPDATE:
System software update.
y
OUTPUT Area:
Four RJ45 Jacks provide signal output.
u
HDMI LOOP OUT:
Local HDMI loop output port.
i
HDMI INPUT:
HDMI Input port. Connect source with HDMI cable.
o
DC IN:
Plug the 12V2.5A DC power supply into the unit.
a
receiver
CAT6:
Connect the CAT input of the receiver with the CAT output of the transmitter with CAT5E/6 cable.
q
EQ Selector:
Equalizer selector.See the EQ description.
w
LOCK LED:
This red LED will illuminate when the Splitter and Receiver is connected with CAT5e/6 cable.
e
HDMI OUT:
HDMI Output port. Connect to TV with HDMI cable.
r
DC IN:
Plug the 5V1A DC power supply into the unit.
t
IR RX:
IR Control System Over CAT5e/6 Cable IR Receiver. SINK to Source, plug Wideband IR Rx into this unit.
y
IR TX:
IR Control System Over CAT5e/6 Cable IR Transmitter. Source to SINK, plug Wideband IR Tx into this unit.
u
OPERATION CONTROLS AND FUNCTIONS
3