A-Neuvideo ANI-0108POE-XT Gebruiksaanwijzing - Pagina 7

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} A-Neuvideo ANI-0108POE-XT. A-Neuvideo ANI-0108POE-XT 12 pagina's. 1x8 hdmi poe 1080/4k30 cat6 extender splitter, ir return, w/ 8x receivers 230 ft (70m) auto setup

Pagina afdrukken

OPERATION CONTROLS & FUNCTIONS

Transmitter Panel

q POWER LED:

When the Transmitter is powered on, the red power LED will illunminate.

w CAT OUT (1~8):

e POWER LED (GREEN):

the Receiver through a CAT cable, the Power LED will be on.

r DATA SIGNAL INDICATOR (YELLOW):

• Illunimating: HDMI signal with HDCP.

• Flashing: HDMI signal without HDCP.

• Dark: No HDMI signal.

t VIDEO OUT:

HDMI signal loop output port, connect a HDMI display device such as TV or Monitor

with an HDMI cable.

y VIDEO IN:

HDMI signal input port, connect to a HDMI source device such as DVD or set-top box

with an HDMI cable.

u IR-T:

IR signal output port. Connect to IR blaster cable, the IR signal is from "IR IN" port of the

Receiver.

i EDID DIP SWITCH:

o UP DATE:

Mini USB update port. Connect to PC for firmware updating.

a DC 12V:

DC 12V Power input port.

s POWER SWITCH:

Connect to the CAT port of the Receiver with a CAT6 cable.

Transmitter supports one-way POC function. When it supplies power to

Used to set EDID mode. Please refer to Section "EDID Mode" for details.

Press the switch to power on/off the device ("-" for on, "o" for off).