AEG protect d. 2000 Handleiding voor installatie en gebruik - Pagina 9

Blader online of download pdf Handleiding voor installatie en gebruik voor {categorie_naam} AEG protect d. 2000. AEG protect d. 2000 25 pagina's. Fume extractor hood

Pagina afdrukken

Installation

Installation
Installation
Installation
Installation
Rest the template correctly against the wall. The lower
corner of the template corresponds to the lower corner of
the extractor hood. Fig. 3.
A cross is marked
on the template
to indicate the
centre. Mark
this point on
the wall. Fig. 3.
Drill two holes (Ø 8 mm) in the
wall at the points indicated,
insert the stops (Ø 8 mm) and
screw in the hooks provided.
Fig. 3.
Fig. 3.
Fig. 3.
Fig. 3.
Fig. 3.
Hang the hood and adjust its
position using the screws on the
hooks. Fig. 4.
Fig. 4.
Fig. 4.
Fig. 4.
Fig. 4.
The reference point "a a a a a "
marked on the body of the
extractor hood must coincide
with the line you have drawn
on the wall. Fig. 4.
Once the extractor hood has been correctly aligned,
remove the grease filter.
34
Fig. 3.
Fig. 3.
Fig. 3.
Fig. 3.
Fig. 3.
Fig. 3.
Fig. 3.
Fig. 3.
Fig. 4.
Fig. 4.
Fig. 4.
Fig. 4.
Fig. 3
Fig. 3
Fig. 3
Fig. 3
Fig. 3
Fig. 4
Fig. 4
Fig. 4
Fig. 4
Fig. 4