AEG protect d. 3000 Bedienings- en installatiehandleiding - Pagina 14
Blader online of download pdf Bedienings- en installatiehandleiding voor {categorie_naam} AEG protect d. 3000. AEG protect d. 3000 19 pagina's. Aeg cooktop user manual
Ook voor AEG protect d. 3000: Bedienings- en installatie-instructies (17 pagina's)
Pagina afdrukken
Wall unit mounting - Fig. 7
First decide which functioning version is better for you.
If you decide to use the hood in exhausting version we suggest to position
the upper section of the chimney so that the oulet slots are not visible
once installation has ended, on the contrary if is decided to use the hood
in recycling version BE SURE that the side with slots is up (see also A-B-
C sequence on on Fig. 7).
Assembling the chimney flue support/bracket (3 parts):
The three parts should be fixed with 4 screws, the support extension
is adjustable and should correspond to the internal width of the
telescopic chimney flue.
Assembling the deflector (3 parts – only for filter version):
The three parts should be fixed with 2 screws, the deflector
extension is adjustable and should correspond to the width of the
chimney flue support, to which it is then fixed.
Fig. 7
OK!
75