Kohler 1.1746.005 Installatie- en gebruikershandleiding - Pagina 12

Blader online of download pdf Installatie- en gebruikershandleiding voor {categorie_naam} Kohler 1.1746.005. Kohler 1.1746.005 29 pagina's.

Electrical

1. The electrical installation must comply with BS 7671 (commonly referred to as

the IEE Wiring Regulations) and all relevant building regulations, or any particular

regulation or practice specified by the local electricity supply company.

2. Ensure that all circuit protection devices, switches and cabling is adequate

for the rated current of the shower and that the rating of the electricity supply

company fuse and the consumer unit are adequate for the additional demand.

3. The shower must be earthed. Ensure any supplementary bonding complies

with the relevant regulations.

4. This shower is intended to be permanently connected to the fixed electrical wiring

of the mains system. A separate supply must be provided from the consumer

unit to the shower.

5. DO NOT supply any other electrical equipment including extractor fans or pumps

via this product.

6. This shower must be provided with means for local disconnection that is

incorporated into the fixed wiring in accordance with the relevant local wiring

regulations. This must be a double pole switch, which has at least 3 mm contact

separation in each pole. The switch can be a ceiling mounted pull-cord type

within the shower room or a wall mounted switch fitted in the applicable zone

area.

7. A 30mA Residual Current Device (RCD) must be incorporated into the electrical

supply to this shower in accordance with wiring regulations.

8. DO NOT apply excessive force to the terminal block.

9. All electrical connections should be checked for tightness to prevent overheating

before switching on the electrical supply.

10. DO NOT switch on the electrical supply until the plumbing has been completed

and checked for leaks.

1494247-W2-A

ECO

LOW

HIGH

POWER

THERMOSTATIC

Plumbing and Electrical Schematic