Kohler BodySpa K-1000 Handleiding voor installatie-instructies - Pagina 22
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Kohler BodySpa K-1000. Kohler BodySpa K-1000 28 pagina's. Tower custom hydro-massage system
Ook voor Kohler BodySpa K-1000: Handleiding voor huiseigenaren (48 pagina's)
Pagina afdrukken
B. INSTALL KEYPAD
CAUTION: Risk of personal injury or product
damage. The metal plate must be installed flush
with the finished wall or slightly recessed (maximum
1/4").
Feed the control cable through the hole in the metal plate.
Use two flathead screws to attach the metal plate to the
outlet box or finished wall material so the metal plate is
flush with the finished wall or slightly recessed
(maximum 1/4").
Snap the keypad modular plug into the keypad cable jack.
Apply silicone sealant to each of the keypad screw holes,
and secure the keypad to the metal plate with four
panhead screws.
CAUTION: Risk of personal injury or product
damage. Prevent water damage to the keypad by
applying silicone sealant as instructed.
IMPORTANT: Apply a continuous bead of clear silicone
sealant to the cover plate sealant grooves, as shown.
Slip the center pin at the top of the cover plate up through
the hole in the keypad. Secure the cover plate to the
keypad with a panhead screw.
Select the bottom cap – it contains the word "KOHLER",
and has a small notched area along the contact surface
edge.
IMPORTANT: Apply silicone sealant to the bottom cap
along the back surface and also to the edge that contacts
the cover plate. Align the bottom cap holes with the cover
plate pins, and push the cap into place. Repeat for the top
cap.
Remove any excess sealant.
AB
116290-2-
Keypad
Panhead
Screw
Top
Cap
Apply Silicone
Sealant
Center
Pin
Apply Silicone
Sealant to
Sealant
Grooves
Apply Silicone
Sealant
22
Metal
Plate
Flathead
Screw
Snap Plugs
Apply Silicone
Sealant
Cover Plate
Panhead
Screw
Bottom
Cap
Kohler Co., Kohler WI U.S.A.
Finished
Wall
Keypad