AEG X99384MD01 Handmatig - Pagina 5

Blader online of download pdf Handmatig voor {categorie_naam} AEG X99384MD01. AEG X99384MD01 8 pagina's.

Pagina afdrukken

conTrols

C D

a: hood Functions on/off.

When the button is touched with the hood

turned off, all functions light up (intensity

50%) and are enabled.

When the button is touched with the hood

in operation, all functions are turned off and

disabled (Motor off + lights off).

B: Manages motor speed:

0-V1-V2-V3-V4-P.

When the area is touched, the motor starts

at the speed required.

P = Intensive speed, timed for 5 minutes,

after which the system returns to the

previous speed.

When activated from Motor off it returns

to speed V1.When the required speed is

touched, it will become brighter (intensity

100%) than the other functions (intensity 50%).

c: Delay function.

Touching this button activates automatic

shutdown of the Motor, the Fans and the

lighting with a 10 minute delay. It can only

be activated with the motor on, running at

any speed except Intensive, and with the

sensor = off.

Enables / Disables the Remote Control

Receiver.

When this button is pressed and held for

4 seconds (Motor off + lights off, in the

absence of other alarms, the led will light

up for:

4 seconds to indicate that the remote

control has been activated

2 seconds to indicate that the remote

control has been Deactivated.

D: sensor.

In this mode the hood operates

automatically for a maximum of 5 hours,

after which it switches the Motor off. The

hood modifies the speed of the motor

according to the findings of the sensor.

Buttons B and c do not work. The function

is disabled by pressing the Button or turning

the hood off.

e: Manages lighting Intensity:

0-l1-l2-l3-lMax.

When this area is touched, the lights turn on

at the required intensity. When the lighting

intensity is touched, it will become brighter

(intensity 100%) than the other functions

(intensity 50%).

F: Filter resetresets the Filter

saturation alarm when the

button is touched with the motor

and lighting turned off.

after 100 hours operation the led lights

up continuously to indicate saturation of

the Metal Grease Filters. after 200 hours

operation the Led flashes to indicate

saturation of the activated charcoal Filters.

Enables/Disables the Activated Charcoal

Filter Alarm.

When this button is pressed and held for

4 seconds(Motor off + lights off), in the

absence of other alarms, the led will light

up for:

4 seconds to indicate the activated charcoal

Filter alarm has been activated

2 seconds to indicate the activated charcoal

Filter alarm has been deactivated.

after connecting the hood to the mains, the

commands are activated after 4seconds.

When the hood is switched off, none of the

functions is displayed, and only the normal

lettering on the control panel is visible.

all the rest will light up (intensity 50%) when

button a is touched.

The controls are activated by touching the

selected function, which will light up more

brightly (intensity 100%) with respect to

the other hood functions (intensity 50%).

When no commands are given for at least

10 seconds, only the selected functions will

be lighted (Intensity 100%) and all the rest

will turn off (Intensity 50%). after 7 hours in

operation, if no further commands are given

the hood will switch off (Motor off + lights

off), from here you can touch for activated

the function, and the next touch you can

select the desired function.It is possible to

activate one of the hood functions (speed

and lighting) not just by touching the control

panel, but also by placing a finger on the

panel and sliding it towards the chosen

english