Kohler K-10391 Installatie- en onderhoudshandleiding - Pagina 22

Blader online of download pdf Installatie- en onderhoudshandleiding voor {categorie_naam} Kohler K-10391. Kohler K-10391 50 pagina's. Showerheads
Ook voor Kohler K-10391: Installatie- en onderhoudshandleiding (17 pagina's), Installatie- en onderhoudshandleiding (32 pagina's)

Tools and Materials

1/4"

Hex Wrench

Propane

Torch

IMPORTANT! Risk of product damage. Do not apply direct heat

to the valve. Excessive heat will damage the plastic components and

plaster guard.

IMPORTANT! This valve is not intended to be used as a shut-off

valve. If less than three accessories will be installed, do not plug any

outlets without completing the two-way conversion.

Observe all local plumbing and building codes.

Do not remove the plaster guard until instructed to do so.

A mixed water supply is required for this valve.

Read these instructions and plan the installation before beginning.

Component location, spacing, and situational requirements can

vary.

Shut off the water supply.

Inspect the waste and supply tubing; replace if necessary.

1205548-2-B

Tubing Cutter

Thread Sealant

Plus:

• 1/2" Piping or Copper

Tubing for outlets

• 3/4" Piping or Copper

Solder

Tubing for inlets

• 1/2" NPT Plug

Kohler Co.