AEG L 87696 WD Gebruikershandleiding - Pagina 24
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AEG L 87696 WD. AEG L 87696 WD 36 pagina's. Washer dryer
Pagina afdrukken
24
www.aeg.com
11.1 NON-STOP programme
WARNING!
Do not put a plastic device/
ball for the detergent into
the drum.
1. Press button On/Off for some
seconds to activate the appliance .
2. Load the laundry one item at a time.
3. Put the detergent and the additives
in the appropriate compartment.
4. Turn the programme dial to the
washing programme. The display
shows the symbols of the different
washing phases.
5. Set the available options.
WARNING!
Do not set a spin speed
lower than the automatic
speed of the set
programme.
11.2 Washing and Drying at
automatic levels
1. Press button Drying Level repeatedly
until the black line appears under
one of the dryness level symbol.
The iron dry level
The cupboard dry level
The extra dry level
The drying symbol comes on.
The anti-crease symbol comes on.
The display shows that the appliance is
ready to start.
The time value on the display is the
duration of both cycles washing and
drying, calculated on a default load
size.
To have a good drying the
appliance does not let you
set a too low spin speed for
the items to be washed and
dried.
2. Press button Start/Pause to start the
programme.
The set dryness level symbol stays
on (e.g. Cupboard dry). The others
level symbols go off.
The door locked symbol comes on.
The display shows the new time value
each minute.
The last minutes of the
drying cycle the appliance
performs the anti-crease and
the cooling phases.
11.3 Washing and Timed
drying
WARNING!
Do not put a plastic device/
ball for the detergent into
the drum.
1. Press button Drying Time repeatedly
to set the drying time value:
The drying symbol comes on.
The anti-crease symbol comes on.
The drying time symbol comes on.
The display shows the set drying value
time .
Set drying time value.
Each time you press this button the time
value increases by 5 minutes.