Kohler K-13139 Installatiehandleiding - Pagina 6

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Kohler K-13139. Kohler K-13139 36 pagina's. Single-control bath and shower trim
Ook voor Kohler K-13139: Handleiding voor huiseigenaren (21 pagina's)

Pagina afdrukken

High Flow

Valve

Setscrew

3. Water Temperature Adjustment

CAUTION: Risk of personal injury. The water temperature

should never be set above 120° F (49° C).

NOTE: Do not remove the O-ring and collar at this time. Removing

the O-ring and collar will change the factory setting for the

maximum water temperature.

Turn the valve clockwise to the full open position and let the hot

water run for several minutes. Position a thermometer in the

water stream and check the temperature.

For minor water temperature changes, adjust the setscrew, and

recheck the water temperature.

For major water temperature changes, remove the O-ring and

collar from the valve stem. Slowly rotate the valve stem until the

desired maximum water temperature is reached.

Reinstall the collar on the valve stem with the setscrew against

the side of the tab.

Reinstall the O-ring, rotate the valve stem counterclockwise to

shut the water off.

Recheck the water temperature to ensure desired maximum water

temperature.

NOTE: After adjustment, complete the required information on the

valve label (if supplied).

1036140-2-A

Standard

Valve

Tab

Setscrew

Collar

Tab

Valve

Label

Valve

Stem

Collar

O-Ring

Kohler Co.