AEG LAVATHERM 7041 TK ELECTRONIC Gebruikersinformatie - Pagina 6

Blader online of download pdf Gebruikersinformatie voor {categorie_naam} AEG LAVATHERM 7041 TK ELECTRONIC. AEG LAVATHERM 7041 TK ELECTRONIC 32 pagina's. Condensation dryer

Pagina afdrukken

1. Troubleshooting by Yourself

• Clean the heat exchanger regularly.

• With stacked washer and dryer: Do not place objects on the dryer.

These may fall off during operation.

• The covering bonnet of the bulb for the drum light must be screwed

down tightly.

Child safety

• Keep packaging away from children. Risk of suffocation!

• Children can often not see the dangers associated with electric ma-

chines. Never leave unsupervised children near the dryer.

• Ensure that children and small animals cannot climb into the dryer's

drum. Risk of death! Keep the dryer door shut whenever it is not be-

ing used.

General safety

• Only specialists may undertake repairs on the dryer.

• Never start up the dryer if the mains cable is damaged or if the oper-

ating screen, operating plate or base area are damaged so that the in-

side of the machine is open and accessible.

• Switch off the dryer before all cleaning, care or maintenance work.

Also disconnect the mains plug from the socket or – with permanent

connections – switch off the LS switch in the fuse box and/or fully

unscrew the screwed-in fuse.

• Disconnect the machine from the power supply during long pauses in

operations.

• When removing from the socket, never pull the mains plug by the ca-

ble, instead take a hold of the plug.

• Manifold plugs, couplings and extension cables must not be used.

Risk of fire from overheating!

• Do not spray down the dryer with jets of water. Risk of electric shock!

• Do not lean on the open door. The machine may tip over.

• Once the drying cycle has been interrupted, the laundry and drum

may be hot. Risk of burns! Take care when removing the laundry.

Disposal

Packaging material

The packaging materials are environmentally friendly and can be recy-

cled. The plastic components are identified by markings, e.g. >PE<,

>PS<, etc. Please dispose of the packaging materials in the appropriate

container at the community waste disposal facilities.