AEG LAVATHERM T56600 Gebruikersinformatie - Pagina 20

Blader online of download pdf Gebruikersinformatie voor {categorie_naam} AEG LAVATHERM T56600. AEG LAVATHERM T56600 33 pagina's. Condensation dryer

125983250.qxp

2006-03-21

Cleaning heat exchanger

If the HEAT EXCHANGER (WARMTEWISSELAAR) display is illuminated, the

heat exchanger needs to be cleaned.

Caution! Operating when the heat exchanger is clogged with lint can dama-

ge the dryer. This also increases energy

consumption.

1. Open loading door

2. Open base door. To do this, press the

release button on the bottom of the

loading opening and open the door to

the left.

3. Remove lint from the inside of the door

and the heat exchange chamber. Wipe

the door seal with a damp cloth.

4. Turn both lock washers inwards.

5. Use the handle to pull the heat exchan-

ger out of the base and carry it horizon-

tally to prevent any remaining water

from spilling.

6. To empty the heat exchanger, hold

vertically over a washing-up bowl.

Caution! Do not use sharp objects to

clean. The heat exchanger could develop leaks.

7. Clean heat exchanger.

It is best to use a brush or to rinse thoroughly with a shower head.

8. Replace heat exchanger and lock into place (turn both lock washers

outwards until they snap into place).

9. Close base door.

The dryer will not operate if the HEAT EXCHANGER (WARMTEWISSELAAR)

indicator is still lit.

Caution! Never operate the dryer without the heat exchanger.

11:11

Page 20