AEG TR834E94E Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AEG TR834E94E. AEG TR834E94E 32 pagina's.

Pagina afdrukken

• Fabric softeners, or similar products, should only be used

as specified by the product manufacturer's instructions.

• Remove all objects from items that could be a source of fire

ignition such as lighters or matches.

• WARNING: Never stop a tumble dryer before the end of the

drying cycle unless all items are quickly removed and

spread out so that the heat is dissipated.

• Before any maintenance operation, deactivate the

appliance and disconnect the mains plug from the socket.

2. SAFETY INSTRUCTIONS

2.1 Installation

Warning: Risk of fire / Flammable

materials.

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Follow the installation instructions supplied

with the appliance.

• Do not install the appliance in an

environment with no air exchange

The appliance contains flammable gas,

propane (R290), a gas with a high level of

environmental compatibility. Keep fire and

ignition sources away from the appliance.

Be careful not to cause damage to the

refrigerant circuit containing propane.

• Always take care when moving the

appliance as it is heavy. Always use safety

gloves and enclosed footwear.

• Do not install or use the appliance where

the temperature can be lower than 5°C or

higher than 35°C.

• The floor area on which the appliance is to

be installed must be flat, stable, heat

resistant and clean.

• Make sure that there is air circulation

between the appliance and the floor.

• Always keep the appliance vertical when it

is being moved.

• The rear surface of the appliance must be

put against a wall.

• When the appliance is in its permanent

position, check if it is levelled correctly

ENGLISH

with the aid of a spirit level. If it is not,

adjust the feet accordingly.

2.2 Electrical connection

WARNING!

Risk of fire and electric shock.

• Connect the mains plug to the mains

socket only at the end of the installation.

Make sure that there is access to the

mains plug after the installation.

• WARNING: This appliance is designed to

be installed / connected to a grounding

connection in the building.

• Make sure that the parameters on the

rating plate are compatible with the

electrical ratings of the mains power

supply.

• Always use a correctly installed

shockproof socket.

• Do not use multi-plug adapters and

extension cables.

• Do not pull the mains cable to disconnect

the appliance. Always pull the mains plug.

• Do not touch the mains cable or the mains

plug with wet hands.

2.3 Use

WARNING!

Risk of injury, electric shock, fire, burns

or damage to the appliance.