Kohler C3 K-4107KR Installatiehandleiding - Pagina 4
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Kohler C3 K-4107KR. Kohler C3 K-4107KR 27 pagina's. Toilet seat with bidet functionality
Pagina afdrukken
1. Match toilet roughing-in requirements and installation tips
2
3
5
1. Distance between installation holes: 136 - 210mm.
2. Distance between installation holes and tank front rim:>20mm.
3. Distance between installation holes and bowl inner rim: ＜70mm.
4. Distance between installation holes and tank top rim: 460 - 490mm.
5. Bowl inner diameter: 370 - 390mm.
6. The distance between the seat and the plug should be maximum 1 meter.
2. Install an Electrical Outlet
WARNING: Risk of electric shock, fire, or personal injury.
This product must be grounded. Connect only to a dedicated
220~240V AC, 50/60Hz, 10A circuit protected by Ground-Fault
Circuit-Interrupter (GFCI) or Earth-Leakage Circuit-Breaker (ELCB).
It is recommended to use water-resistant socket. Do not use an
extension cord with the product.
NOTE: Follow local codes when determining the electrical outlet location.
Route the electrical and install to a 220-240V GFCI- or ELCB-protected
receptacle.
3. Preparation
Turn off the water supply to the toilet.
Flush the toilet to relieve any pressure from the water supply hoses.
Position a container under the fill valve to catch any excess water.
Disconnect the water supply hose from the toilet fill valve.
Remove the existing toilet seat.
1219877-KR01-B
1
4
4
Kohler Co.