Kohler C3-520 Handleiding voor huiseigenaren - Pagina 10
Blader online of download pdf Handleiding voor huiseigenaren voor {categorie_naam} Kohler C3-520. Kohler C3-520 41 pagina's. Smart seat
Ook voor Kohler C3-520: Installatiehandleiding (17 pagina's), Installatiehandleiding (33 pagina's), Installatiehandleiding (17 pagina's)
![Kohler C3-520 Handleiding voor huiseigenaren](/uploads/products/server2/2625644/2625644.jpg)
Press and hold button Function Introduction
1.
Night light function (ON/OFF)
Press and hold front wash button for 2s to activate or deactivate night light
function.
Deactivate: long beep, night light OFF.
Activate: short beep, night light is controlled by ambient light (night light ON when
ambient light is dark, vice versa).
2.
Auto deodorizing function (ON/OFF)
Press and hold rear wash button for 2s to activate or deactivate deodorizing function.
Deactivate: long beep.
Activate: short beep.
3.
Prolonged seating indication function (ON/OFF)
Press and hold MASSAGE button for 2s to activate or deactivate prolonged
seating indication function.
Deactivate: long beep.
Activate: short beep.
When seated, the buzz will generate a beep for indication every 15min, the
indication will be stopped by holding the STOP button or wait for a while.
4.
Energy saving function (ON/OFF)
Press and hold seat temp for 2s to activate (short beep)/deactivate (long
beep) energy saving function. Seat temp LED flashing indicates energy
saving function is ON, seat temp LED stop flashing indicates energy saving
function is OFF. When seated, energy saving mode is cancelled. One week
after the activation, the seat performs an automatic detection in user's
habitual routine. Starting from the second week, the seat automatically gets
itself into Energy Save mode when it is in idle, depending on the detected
user routine of the first week. During the third week, the seat bases its
judgment on the data collected during the previous week to decide when
it enters into Energy Save mode. It works the same for the following weeks.
5.
Wand auto sanitize function (ON/OFF)
Press and hold SANITIZE button for 2s to activate or deactivate auto sanitize
function.
Deactivate: long beep.
Activate: short beep.
After a long idle period, Bidet will perform sanitize function by activating UV
sanitize function automatically. The duration is 45min, No sterilization function
shall be activated after this process in another 24hrs.
6.
Power off Function (ON/OFF)
Press and hold STOP button for 2s to deactivate toilet. Press any key on side
key board or light side key board up when seated.
1350325-KR01-A
10
Kohler Co.