Kohler CIMARRON K-6076T-TFC Handleiding voor installatie-instructies - Pagina 3
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Kohler CIMARRON K-6076T-TFC. Kohler CIMARRON K-6076T-TFC 9 pagina's. 4.8l skirted touchless class five one-piece toilet
Pagina afdrukken
Finished Wall
INSTALLATION
TO REMOVE EXISTING TOILET
Turn off the water supply. Flush the toilet, and use a sponge
to remove the remaining water from the tank and bowl.
Disconnect the supply shut-off valve (if present), and remove
the old tank and bowl.
Remove the old gasket from the floor
and the closet flange with a putty knife.
Remove the old T-bolts and discard
them.
NOTICE:
if the new toilet is not
installed immediately, temporarily stuff
a rag into the closet flange.
NOTICE: Do not use white cement or high lime content
cements to install this toilet. The expansion of cement due to
a rise in temperature may make the toilet crack or cause
damage. Kohler is not responsible for any damage caused by
installation with the use of cement.
TO INSTALL SUPPLY
SHUT-OFF VALVE
Install the supply shut-off valve so it is
127mm above the finished floor line,
and 152mm to the left of the closet
flange centerline.
The centerline of the supply shut-off
valve outlet should extend 67mm from
the finished wall. Install the supply
shut-off valve with the outlet vertical.
1278411-T01-B
744
C OF OUTLET
400
L
Kohler reserves the right to change marked dimensions without prior notice.
127
305/400
K-6076T-TFC
709
SUPPLY
390
127
Fig.#1
1
Fig.#2
Closet Flange
2
Supply Shut-Off Valve
152
Closet Flange
Centerline
Fig.#3
3
-3-
FRONT OF BOWL
480
312
368
152
(
)
127mm
152
mm
270
T
67mm;