Kohler COMMAND CH12.5 Gebruikershandleiding - Pagina 14
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Kohler COMMAND CH12.5. Kohler COMMAND CH12.5 17 pagina's. Horizontal crankshaft
![Kohler COMMAND CH12.5 Gebruikershandleiding](/uploads/products/server2/2635030/2635030.jpg)
- 1. Safety Precautions
- 2. California Proposition 65 Warning
- 3. Oil Recommendations
- 4. Oil Type
- 5. Fuel Recommendations
- 6. Cold Weather Starting Hints
- 7. Maintenance Instructions
- 8. Maintenance Schedule
- 9. Change Oil and Oil Filter
- 10. Oil Sentry
- 11. Carburetor Troubleshooting and Adjustments
- 12. Troubleshooting
- 13. Specifications
- 14. Parts Ordering
- 15. Major Repair
- 16. Model Designation
Storage
If the engine will be out of service for two months or
more, use the following storage procedure:
1. Clean the exterior surfaces of the engine.
2. Change the oil and filter while the engine is still
warm from operation. See "Change Oil and Oil
Filter" on page 9.
3. The fuel system must be completely emptied, or
the gasoline must be treated with a stabilizer to
prevent deterioration. If you choose to use a
stabilizer, follow the manufacturers
recommendations, and add the correct amount for
the capacity of the fuel system. Fill the fuel tank
with clean, fresh gasoline. Run the engine for 2-3
minutes to get stabilized fuel into the carburetor.
To empty the system, run the engine until the fuel
tank and system are empty.
4. Remove the spark plug. Add one tablespoon of
engine oil into the spark plug hole. Install the plug,
but do not connect the plug lead. Crank the engine
two or three revolutions.
5. Remove the spark plug. Cover the spark plug hole
with your thumb, and turn the engine over until the
piston is at the top of its stroke. (Pressure against
thumb is greatest.) Reinstall the plug, but do not
connect the plug lead.
6. Store the engine in a clean, dry place.
Specifications
Model: .................................................. CH11 ............. CH12.5 ........... CH13 .............. CH14 .............. CH15/CH16**
Bore: ................................. mm (in.) ... 87 (3.43) ........ 87 (3.43) ......... 87 (3.43) ......... 87 (3.43) ......... 90 (3.55)/90 (3.55)
Stroke: ............................... mm (in.) ... 67 (2.64) ........ 67 (2.64) ......... 67 (2.64) ......... 67 (2.64) ......... 67 (2.64)/67 (2.64)
Displacement: .................. cm
Power (@3600 RPM): ....... kW (HP) ... 8.2 (11*) ......... 9.33 (12.5*) ..... 9.75 (13*) ....... 10.50 (14*) ..... 11.2 (15*)/11.9 (16*)
Max. Peak Torque (@ RPM): ... ft. lb. ... 19.7 @2400 ... 20.5 @2500 .... 21.1 @2200 ... 21.3 @2500 ... 24.8 @2400/25.3 @2400
Compression Ratio: ............................ 8.5:1 ............... 8.5:1 ................ 8.5:1 ............... 8.5:1 ............... 8.5:1/8.5:1
Weight: ................................. kg (lb.) ... 40 (88.3) ........ 40 (88.3) ......... 40 (88.3) ......... 40 (88.3) ......... 40 (88.3)/40 (88.3)
Oil Capacity (w/filter): ..... L (U.S. qt.) ... 1.9 (2) ............ 1.9 (2) ............. 1.9 (2) ............. 1.9 (2) ............. 1.9 (2)/1.9 (2)
Lubrication: ..........................................
Exhaust Emission Control System for CH11,12.5,13,14,15,16 is EM.
*Horsepower ratings exceed Society of Automotive Engineers Small Engine Test Code J1940.
Actual engine horsepower is lower and affected by, but not limited to, accessories (air cleaner, exhaust, charging, cooling,
fuel pump, etc.), application, engine speed and ambient operating conditions (temperature, humidity, and altitude). Kohler
reserves the right to change product specifications, designs and equipment without notice and without incurring
obligation.
**CH16 engine is equipped with SMART-SPARK
14
3
3
(in
) ... 398 (24.3) ...... 398 (24.3) ....... 398 (24.3) ....... 398 (24.3) ....... 426 (26.0)/426 (26.0)
computerized ignition system.
™
Parts Ordering
The engine Model, Specification, and Serial Numbers
are required when ordering replacement parts from your
Kohler Engine Service Dealer. These numbers are found
on the identification plate which is affixed to the engine
shrouding. Include letter suffixes if there are any. See
"Engine Identification Numbers" on page 5.
Always insist on genuine Kohler parts. All genuine
Kohler parts meet strict standards for fit, reliability, and
performance.
Major Repair
Major repair information is available in Kohler Engine
Service Manuals. However, major repair generally
requires the attention of a trained mechanic and the
use of special tools and equipment. Your Kohler
Engine Service Dealer has the facilities, training, and
genuine Kohler replacement parts necessary to
perform this service. For Sales & Service assistance
call 1-800-544-2444 (U.S. & Canada) or contact your
Kohler Engine Dealer or Service Distributor, they're in
the Yellow Pages under Engines-Gasoline.
Model Designation
Model CH15ST for example: C designates Command
engine, H designates horizontal crankshaft, and 15
designates horsepower. A letter suffix designates a
specific version as follows:
Suffix
Designates
S
Electric Start
T
Retractable Start
ST
Electric/Retractable Start
GT
Generator Application/Retractable Start
GS
Generator Application/Electric Start
PT
Pump/Retractable Start
RT
Gear Reduction/Retractable Start
Full Pressure w/full Flow Filter