Kohler K-2607 Installatie- en onderhoudshandleiding - Pagina 5

Blader online of download pdf Installatie- en onderhoudshandleiding voor {categorie_naam} Kohler K-2607. Kohler K-2607 32 pagina's. Bridge cabinet

Pilot Hole

Lag Bolt

Screw

Pilot Hole

3. Secure the Cabinet

CAUTION: Risk of property damage. Use care when

moving the cabinet to avoid impacting, sliding, or

side-loading the legs.

NOTE: The K-2607 bridge cabinet is designed to be installed with

the K-2604 vanity and is not intended to be installed individually.

Read both product installation instructions before beginning. The

vanity should be installed before the bridge cabinet.

To properly secure the cabinet, 2x6 backing material must be

installed behind the ﬁnished wall. Refer to the K-2604 vanity

installation instructions for site preparation.

Use care to lift and place the cabinet in position against the

previously installed vanity and ﬁnished wall. Do not slide or

side-load the legs.

Verify the cabinet is level and ﬂush against the vanity, and the

back rail is plumb against the wall. If necessary, turn the

leveler(s) to adjust the unit.

Using a 1/4" drill bit, drill two pilot holes through the back rail

and the ﬁnished wall. Verify the pilot holes are positioned to

ensure the lag bolts will engage the 2x6 backing material.

Using a 1/8" drill bit, drill two pilot holes through the side of the

cabinet and into the vanity.

Kohler Co.

Leveler

1207227-2-A