AQC MAXIREACH EBD-60302 Gebruikershandleiding - Pagina 13
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AQC MAXIREACH EBD-60302. AQC MAXIREACH EBD-60302 16 pagina's. Pivoting extension boom
Pagina afdrukken
Pivoting Extension Boom
9 .7
MAXIDRIVE exhaust fans (discard duct companion flange for direct boom
base fan mount)
MAXIDRIVE fans can be installed on top or bottom of boom base. Direction of exhausted air has
to be confirmed by customer or engineer.
1. Prior to installing the fan, ensure direction of ductwork connected to fan outlet will not come
in direct contact with obstacles such as overhead cranes, light fixtures, etc. Usage of elbows
or bends are allowed.
2. Install fan on boom base using the fasteners. Bolt pattern on 1HP fan inlet match 6" boom
base flanges and 2HP fan inlet matches 8" boom base flange.
3. Connect exhaust ductwork to fan outlet.
Note: if a 2HP fan (8" inlet) is used with a 6" diameter swing boom, installer will need to supply an
offset bend such as drawing below in order for fan scroll to clear support wall or column. A.Q.C.
may supply offset if specified.
10. START UP
10.1
Check list
1. Move extension boom from right to left and ensure it does not "jerk".
2. Ensure extension boom does not "swing" excessively.
3. Ensure swing boom does not hit obstacles such as lights, columns, etc.
4. Ensure exhaust duct is sealed and installed properly.
5. Ensure all flexible hoses are clamped tight.
WARNING!
Refer to the Safety section prior to proceeding with any
maintenance or inspection on the extension swing boom.
C
PULL ROD
E
UNION
A
13