Aqua KID P2 Snelstarthandleiding - Pagina 6

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Aqua KID P2. Aqua KID P2 8 pagina's.

Use fittings with cylindrical thread with GAS

or BSP pitch. Do not use fittings with

tapered threads.

When fixing the fittings to the head, avoid

using sealing pastes, hardening liquids,

silicone, hemp or other, but only Teflon

tape.

After fixing, open the taps and check that

there are no leaks or drips.

STARTING AND OPERATION OF

THE FILTER

After fixing and connecting the filter to the

water mains, you can start using it.

The first operation is to insert the

cartridge inside the filter.

After closing the water, open the filter

using the special key and insert the filter

cartridge necessary for the chosen

treatment inside it.

CAUTION: Remove the film or package

that wraps the cartridge. If the cartridge

has gaskets, make sure they are

correctly positioned before closing the

sump.

After placing the cartridge in the sump,

put the O-Ring in its seat and screw the

sump clockwise onto the head.

It is recommended to tighten tightly, but by hand (without using the key). If, once put into operation,

drips occur, tighten further with the aid of the key.

Re-open the water, check that there are no drips and vent the vessel by slightly opening the vent

screw on the head (or by pressing the appropriate button if present).

Let the water flow from a tap for a few minutes, in order to evacuate all the air and remove any dust

or dirt present in the filter, even after its assembly.

After these operations the filter is running regularly.

These operations must be repeated every time the filter cartridge is replaced or serviced.

CLEANING AND MAINTENANCE

ATTENTION: This equipment requires regular periodic maintenance in order to ensure the potability

requirements of the treated drinking water and the maintenance of improvements as declared by the

manufacturer.