Dexin MWP41-L Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dexin MWP41-L. Dexin MWP41-L 10 pagina's. Restorable optical cordless mouse

Operation Guide

Power off the mouse

1. Be sure the mouse is NOT in sleep mode. If it is, press any key to wake it up.

2. Press and hold the Connect button on the bottom of the mouse for more than 2

seconds. (The red light will go off while the Connect button is depressed.)

3. Wait until the red light flash once. Release the Connect button.

4. Now, the mouse is in power off mode. No operation can be done.

Power on the mouse

To activate the mouse again, press the Connect button on the bottom of the

mouse once. (DO NOT depress the Connect button for more than 1.5 seconds when

resuming the mouse from power off mode.) The red light will turn on, and the mouse

is ready for normal operation.

Note: Be sure to press the connect button firmly in procedure, if the connect

button is not depressed steadily the red light will be on before 2 seconds

expire. This will result in a change of channel and ID. Don't panic, just

re-connect the mouse to the receiver, and follow step 4 again.

Operations on power saving mode

In order to conserve battery power, the mouse is designed to reduce power

consumption gradually from standby mode to sleep mode, if it is not being used.

Standby mode – Around 2 seconds after the mouse stops moving, it enter into

standby mode.

Sleep mode – If the mouse is left intact for around 8 minutes, it goes to sleep

mode and shuts down the optical sensor to maintain minimum power

consumption. No moving operation is possible in this mode.

Wake up the mouse – This mouse can work promptly under Standby mode so

users might not be able to tell the existence of this mode. But, in sleep

mode, users have to press any button to wake up the mouse for normal

operation.